DC-W80 Document Camera User Manual - English [Important] To download the latest versions of the Quick Start Guide, multilingual user manual, software, driver, etc., please visit Lumens https://www.MyLumens.
Table of Contents Copyright Information................................................................................................ 3 Chapter 1 Safety Instructions...................................................................................4 Chapter 2 Package Contents.................................................................................... 5 Chapter 3 Product Overview.....................................................................................6 3.1 Overview.....................
7.6 I would like to rotate the image............................................................... 18 7.7 I would like to enlarge a part of the image............................................ 18 Chapter 8 Wi-Fi Connection Setting..................................................................... 19 8.1 Network connection.................................................................................. 19 8.2 Log in to the web page..................................................................
Copyright Information Copyrights © Lumens Digital Optics Inc. All rights reserved. Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc. Copying, reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after purchasing this product. In order to keep improving the product, Lumens Digital Optics Inc.
Chapter 1 Safety Instructions Always follow these safety instructions when setting up and using the DC-W80 Document Camera: 1 Operation 1.1 Please use the product in the recommended operating environment, away from water or source of heat 1.2 Do not place product in tilted position or unstable trolley, stand or table. 1.3 Please clean the dust on the power plug prior to usage. Do not insert the product’s power plug into a multiplug to prevent sparks or a fire. 1.
Chapter 2 Package Contents DC-W80 USB cable (USB 2.
Chapter 3 Product Overview 3.1 Overview Lens/Lamp Control panel LED Indicator 3.2 Extension angle Support Arm < Caution > Please only operate in the extended angles as illustrated. Improper usage may damage the machine.
3.3 Precautions for installation 3.4 I/O functions Introduction Front View Back View NO. Item Function Descriptions 1 Power LED Indicator Display the status of the machine. Please refer to 3.4 Description of LED indicator 2 Wi-Fi LED Indicator Display the status of the Wi-Fi. Please refer to 3.4 Description of LED indicator 3 4 Battery LED Indicator Kensington safety Display the status of the battery. Please refer to 3.
NO. Item Function Descriptions lock Reset Button Press the button for initialization to reset to original factory settings. 6 DIP Switch Setting Adjust the resolution setting. The default is 1920*1080/30 fps.
Indicator light is green After connecting the USB cable and the flickering indicator light will indicate that it is charging Press “Battery Check” button to display the battery level Battery level ≥ 75% Battery Battery level 50% ~ 75% Battery level 25% ~ 50% Battery level 3% ~ 25% Flickering green light Battery level < 3% 3.
English - 10
Chapter 4 Installation and Connections 4.1 Machine Size Length x Width x Height: Extended－306 x 140 x 373 mm Closed－137 x 140 x 270 mm Weight: 1.35 kg 4.2 Installation and setup Please set up the DIP switch setting first. Refer to Chapter 9 DIP Switch Setting.
4.3 Connecting to a computer and use Lumens™ software (Wi-Fi mode) Computer ※Please download the relevant software from Lumens website. For more information on the connection method, please refer to Chapter 8 Wi-Fi Connection Setting. 4.
4.5 Connecting to a computer and use Lumens™ software (USB Mode) Projector USBCable HDMICable Computer ※Please download the relevant software from Lumens website. 4.6 Installing Application Software The application software installed on the computer enables you to: Control DC-W80. Capture and record images. Annotate the image, highlight important details and save it. Support the full screen function. Please download the relevant software from the Lumens website.
Chapter 5 Start Using Projector Computer 1. Charge for a recommended 10.5 hours prior to first-time operation. The device is fully charged when all the power bars are full and the green light is constant on. 2. Place an object to be displayed under the camera. 3. Turn on the power and adjust the operation mode according to the connection method. 4. Adjust the support arm and lens to the appropriate positions. 5. Press [AUTO TUNE] button to optimize the image. 6. You are ready to teach/present.
Chapter 6 Introductions to Control Panel Buttons Icon Function Descriptions Turn on and off ※Press and hold for 10 seconds to forcibly turn off the system Battery level check Auto Tune ,,, Automatically adjust the image to have the best brightness and focusing performance Left, right, up, down buttons, used for moving in a direction at the partial enlarged mode Enable/Disable the partial enlarged mode / / Adjust the brightness of the image Zoom in/out images Rotate image: 0° / 180° /Vertical flip/
Freeze English - 16
Chapter 7 Descriptions of Major Functions 7.1 I would like to automatically adjust the image to have the best brightness and focusing performance Press [Auto Tune] for the best brightness and focusing performance. 7.2 I would like to freeze the live image Press FREEZE to freeze the current image on the screen. Press again to lift the freeze. 7.3 I would like to turn on/off the lamp The default state of the lamp is off, press are three levels of brightness. to turn it on or off. There 7.
7.6 I would like to rotate the image Press to rotate the image. (The sequence of switching is: 0°/180°/Vertical flip/Horizontal flip/90°/270°) 7.7 I would like to enlarge a part of the image 1. Press to activate the partial enlarged mode. 2. Press [], [], [], or []to move and view the partial enlarged images. 3. Press to exit the partial enlarged mode.
Chapter 8 Wi-Fi Connection Setting 8.1 Network connection 8.1.1 Switch to the Wi-Fi mode and the Wi-Fi LED indicator will be displayed in blue. 8.1.2 Open the wireless network list on the computer. 8.1.3 Select the [DC-W80_5G_XXXXXX ] (XXXXXX: last 6-digits of the MAC address) in the network list, and input the password for connection (default: 88889999) to start the connection. 8.2 Log in to the web page 8.2.1 Open the web browser and enter the default IP address [192.168.0.1] in the address bar. 8.2.
8.3 Web Page Menu Function Description 8.3.1 Login Screen 1 2 3 No 1 4 Item User Login Account Function Descriptions Enter user login account (default: admin) 2 User Password Enter user password (default: 9999) 3 Remember user account and password Save user login account and password to the browser.
8.3.
8.3.3 Wi-Fi Setting (Access Point Mode) 1 2 3 4 5 6 7 8 9 No 1 Item Wi-Fi Mode Function Descriptions Select Access Point or Client Mode 2 Wi-Fi 5G/2.4G Switch between 5G / 2.
8.3.4 Wi-Fi Setting (Client Mode) 1 3 2 5 No 1 2 Item Wi-Fi Mode Scan 3 Disconnection 4 Remove 5 List of Wi-Fi Wireless Network Device Names 6 Device Name 7 Connection Status 8 Encryption 6 4 7 8 9 Function Descriptions Select Access Point or Client Mode Scan nearby wireless network devices Disconnect from current wireless network device Remove the selected wireless network device from the list Click the wireless device and the following image will be displayed.
9 Signal Status Show the degree of the Wi-Fi signal 8.3.5 System Information 1 2 No 1 2 Item Device and Account IP address Function Descriptions The web page login setting of this DC-W80 device. Click edit to enter edit mode and change the device name, the user account, and the password. The network setting of this DC-W80 device. When the DHCP function is closed, click edit to enter edit mode and change the network setting.
8.3.
8.3.7 Maintenance 1 2 3 4 No Item Reset to the default value Function Descriptions Select the reset button to resume the factory default setting as the web page setting 2 Reboot Click the reboot button and reboot the device 3 Event Logs In the event of an error, an error code log will be established Clean If an error code appears, the user may try to click the Clean button to confirm if the error will repeat itself.
8.3.
Chapter 9 DIP Switch Setting 9.1 Description of DIP DIP DIP1 & DIP2 Function Descriptions Output Resolution DIP3 OFF (Normal mode): 30/25 fps, applicable to general scene ON (High-speed mode): 60/50 fps, applicable to support rapidly changing scene (Only applicable to 1080P) DIP4 OFF: 60Hz ON: 50Hz 9.
Chapter 10 Troubleshooting This chapter describes problems you may encounter while using DC-W80. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact your distributor or the service center. No. 1 Problems Boot without power signal 2 There is no image output from DC-W80 3 Unable to focus 4 When the device is turned on, the LED floodlight is off.
website. https://www.mylumens.com/support Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Manufacturer：Lumens Digital Optics Inc. Product Name：DC-W80 Model Number：4K Document Camera Responsible Party – U.S. Contact Information Supplier：Lumens Integration, Inc. 4116 Clipper Court, Fremont, CA 94538, United States e-mail ：support@mylumens.com FCC Compliance Statement This device complies with Part 15 of the FCC Rules.
