Operation Manual

LUMIGON T2 HD – USER MANUAL
Copyright © 2014 Lumigon A/S - All rights reserved
105

To start using the QuickTouch feature, you will need to congure it in the phone’s settings rst.
1 On a Home screen, touch the Menu key (=).
2 Touch “System settings”.
3 Under “Device”, touch “QuickTouch”.
4 In the upper right corner, slide the switch to the ON position.
5 Touch “Number of shortcuts” to choose the number of QuickTouch shortcuts you want have
access to.
6 If you want the QuickTouch icons to be displayed in black and white, tick off “Grayscale icons” by
touching it.
7 Under “Opening QuickTouch”, you can congure what nger gesture opens your QuickTouch
shortcuts. As a default, QuickTouch shortcuts are set to open when you touch and hold the
QuickTouch area and then slide your nger up into the screen. You can also set the QuickTouch
shortcuts to open when you simply touch & hold the QuickTouch area. To change between these
two settings, touch “Opening QuickTouch”.
8 If you want the phone to vibrate slightly when opening QuickTouch, tick off “Vibrate on touch”
(default).
9 To congure the individual shortcuts, touch “Shortcut one”, “Shortcut two”, etc. and select the
function or app you want to assign to them.

You can choose to enable and disable the QuickTouch feature whenever you like.
1 On a Home screen, touch the Menu key (=).
2 Touch “System settings”.
3 Under “Device”, nd “QuickTouch” and slide its switch to the “ON” position to turn it ON or to the
“OFF” position to turn it OFF.
QuickTouch is ON