Operation Manual

LUMIGON T2 HD – USER MANUAL
Copyright © 2014 Lumigon A/S - All rights reserved
116


To use a Wi-Fi network that does not broadcast its name (SSID), you will need to manually add the network’s details on your phone as
described below. You can also add a network in this manner when you are not within range.
Once you’ve manually added a Wi-Fi network on your phone, your phone will remember this network along with any applicable security
details, and connect to it automatically whenever it is within range.
1 Turn Wi-Fi ON as described above.
2 In the “Wi-Fi” screen, touch “+” in the bottom right corner to add a network.
3 Enter the name of the network (SSID). If applicable, enter security or other network details.
4 Touch “Save”.
The information about the network is saved, and your phone will connect to this network
automatically the next time you come within range.

If you don’t want your phone to automatically connect to a Wi-Fi network that you’ve added or if it’s a network that you no longer use, you can
make your phone “forget” the network.
1 If Wi-Fi is not already ON, turn Wi-Fi ON as described above.
2 In the “Wi-Fi” screen, touch the name of the network you want to forget.
3 Touch “Forget network”.