Operation Manual

Table Of Contents
LUMIGON T2 HD – USER MANUAL
Copyright © 2014 Lumigon A/S - All rights reserved
117

1 If Wi-Fi is not already ON, turn Wi-Fi ON as described above.
2 In the “Wi-Fi” screen, touch & hold a network’s name.
3 Touch “Modify network”.
4 Make your changes.
5 Touch “Save”.

You can change various settings for Wi-Fi, e.g. notications about detected Wi-Fi networks in the Status bar, disconnect policy, etc. in the
advanced Wi-Fi settings.

1 If Wi-Fi is not already ON, turn Wi-Fi ON as described above.
2 In the “Wi-Fi” screen, touch the Menu key.
3 Touch “Advanced”.
TIP: To extend the battery life between charges, turn Wi-Fi OFF when you are not using it. You can also set
your phone to disconnect automatically from Wi-Fi networks when it’s in Sleep mode: On a Home screen,
touch the Menu key (=) > Touch “System settings” > Touch “Wi-Fi” > Touch the Menu key (=) > Touch
Advanced” > Touch “Keep Wi-Fi on during sleep” > Select “Never”.