Operation Manual

LUMIGON T2 HD – USER MANUAL
Copyright © 2014 Lumigon A/S - All rights reserved
133
The eight possible switch settings for the Lumigon dock are displayed below (the black squares indicate the position of the individual
switches):

» Push the individual switches from one side to another.

1 First, congure a prole you want to pair with your dock as described in subsection “Congure a
Behavior Control prole” above.
2 Remove the rubber cover on the bottom side of your Lumigon dock and set the switches in one
of the eight possible combinations (see the image above). Make sure to remember which switch
setting you pair with which behavior prole.
3 Replace the rubber cover on the dock.
4 Place your phone in the dock.
5 In the dialog that appears on the screen, touch the name of the prole you’ve congured to be
paired with this dock, and then touch “Apply”.
The prole will be paired with the dock’s current switch setting and activated on your phone
straight away.
The next time you place your phone in your dock with the same switch setting, this behavior
prole will be activated automatically.
Setting 8Setting 7Setting 6Setting 5
Setting 1 Setting 4Setting 3Setting 2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2