Lumigon T2 HD • Quick Start Guide • Safety Guide • Warranty • End-User License Agreement English
Contents Quick Start Guide Version: T2 HD LEAFLET_EN_v.1.
Dear Customer, Thank you for buying a T2 HD smartphone created by Lumigon in Denmark. For more information on using your device and its features, please refer to our user manual and other online resources available from the Support section of our web page at www.lumigon.com/support. If you don’t find the information you are looking for, you can contact our Support team by e-mail at support@lumigon.com. If your product requires service, please contact the retailer where you purchased your product.
T2 HD overview 1 34 5 2 1. Speaker (top) 11. Menu touch key 2. Power key & Infrared transmitter/receiver 12. Home key 3. 13-megapixel back camera 13. Back touch key 14. Speaker (bottom) 18 4. Noise cancellation microphone 15. Audio jack connector (3.5 mm) 19 5. Back camera flash 16. Micro USB connector ActionKey 17. Microphone 7. Ear speaker 18. Volume / Zoom keys 8. 2.4-megapixel front camera 19. Nano SIM card tray 20. Two-step camera key with autofocus 21.
Dock overview View from the back: Micro USB port for connecting USB charger View from the front: View from the side: USB connector for connecting phone View from the bottom: Switches for Behavior Control USB connector for connecting phone Behavior Control At the bottom of the dock there are switches that allow you to configure different behaviors for the phone when it’s docked.
STEP 1 STEP 2 Pull out the SIM card tray Insert the nano SIM card With your fingernail or a soft plastic tool pull out the SIM card tray. Place the nano SIM card in the tray (cut-off corner in the top left corner and gold contacts facing down). NB: T2 HD is only compatible with nano SIM cards. Any other incompatible or modified SIM cards can damage the SIM card, its data and the device itself. Any such damage is not covered by the warranty.
STEP 3 STEP 4 Insert the SIM card tray back in Assemble the USB charger 1. Carefully push the SIM card tray back in. 2. Make sure the tray is inserted and secured and is completely flush with the casing of the phone. Insert the large end of the supplied USB cable in the USB port of the supplied power adaptor. If the SIM card tray is not inserted correctly, you’ll see a message on the screen saying that the phone is not waterproof.
STEP 5 Charge the phone using method A) or B) B) Use the dock NB: It takes 1.5-2 hours to fully charge the phone. A) Use the USB charger 1. Plug the charger into a power outlet. 1. Plug the charger into a power outlet. 2. Plug the end of the charger cable into the micro USB port of the phone (the USB sign on the head of the cable facing up). 12 Copyright © 2014 Lumigon A/S - All rights reserved 2.
STEP 6 STEP 7 Turn on the phone Follow the onscreen instructions Press and hold down the POWER key for 1-2 seconds until the Lumigon logo appears on the screen, and then release the key. If the phone does not turn on, charge it (see Step 5) and try again. 12:00 1. When you turn on your phone for the first time, you’ll see a Welcome screen. Select your language, and touch “Start”. 2. Follow the onscreen instructions to set up your phone. 3. When prompted, sign in with your Google™ Account.
Safety Guide 16 Copyright © 2014 Lumigon A/S - All rights reserved
READ THIS BEFORE YOU PROCEED Please read these safety guidelines carefully and make sure to observe them to ensure proper and safe use of the device. Failure to observe the safety precautions and warnings in this guide or other product documentation may lead to situations with the risk of bodily injury to yourself or others, electric shock, fire, explosion, damage to your device and other equipment as well as possible legal liabilities and damages.
The device can be charged by either 1) using the supplied USB cable and a computer, 2) by connecting the phone to the supplied dock, or 3) by using the supplied USB power adaptor and USB cable. TO AVOID ELECTRIC SHOCK, FIRE AND INJURY: • DO NOT use damaged power cords, USB cables, power adaptors, or loose electrical sockets. • DO NOT use unauthorized power adaptors or USB cables with your device. • DO NOT connect the device with any incompatible accessories or products.
TO AVOID POTENTIAL INTERFERENCE WITH THE PACEMAKER: • ALWAYS keep the phone more than 15 cm (6 inches) from the pacemaker when the phone is turned ON. • DO NOT carry the phone in a breast pocket. • When speaking on the phone, use the ear opposite the pacemaker to minimize the risk of interference. Safety when driving • Always follow all local laws and regulations on the use of mobile phones while driving.
Safety in areas with explosive atmospheres Areas with a potentially explosive atmosphere are often, but not always, clearly marked. WARNING: Sparks in areas with an explosive atmosphere may cause an explosion or fire resulting in bodily injury or even death. Make sure to turn off the device and obey all signs and instructions. • DO NOT use this device in areas with a potentially explosive atmosphere or where blasting operations are in progress and flammable materials exist, e.g.
Antenna area NOTE: Contact with the antenna area or allowing parts of the human body coming close to the antenna area may impair call quality and cause your device to operate at a higher power level than needed. You can optimize the antenna performance and the battery life by avoiding contact with the antenna area when the phone is in use. General guidelines and precautions You alone are responsible for the use of your device and any consequences of its use.
• We recommend that you store the device in a protective case and only use your finger when interacting with the touch screen. NOTE: A screen that cracks as a result of improper handling is not covered by the warranty. Device getting warm after prolonged use When you use the device for prolonged periods of time, e.g. talking on the phone, charging the battery or browsing the Web, the device may become warm.
Water and dust resistance (IP rating) The device has undergone certified tests to measure its resistance levels to dust and water and complies with the Ingress Protection (IP) rating IP55. The first digit in the IP rating indicates the level of protection against solid objects, including dust. The second digit indicates the resistance level to water. The higher the numbers, the higher the respective protection.
Small children • DO NOT leave the device and its accessories within the reach of small children. • DO NOT allow small children to play with the device and its accessories - they could hurt themselves or others, or could accidentally damage the device. • The device contains small parts with sharp edges that may cause injury or that may be detached from the device and pose a choking hazard.
Lumigon’s Limited Warranty Warranty terms & conditions 1. Subject to the warranty terms and conditions specified in this Limited Warranty, Lumigon warrants this Lumigon product (the “Product”) as free of defects in design, materials and workmanship (“Limited Warranty”) at the time of its original purchase. 2.
removable storage media. The Customer shall be solely responsible for backing up his/her data and for removing SIM cards, removable storage media, and any confidential, proprietary, or personal information from the Product before returning it for repair. 10. THIS LIMITED WARRANTY SHALL NOT APPLY TO THE FOLLOWING: i. Warranty claims where the model, serial, and IMEI numbers on the Product or the warranty seal have been altered, deleted, removed, or made illegible. ii.
originally purchased. iii. Before contacting the retailer or Lumigon’s authorized service agent, the Customer should make sure to have the following information at hand: • The Product’s model name, serial number, IMEI number and product number. • The Customer’s full address and contact information. • A copy of the Customer’s original invoice, receipt or sales slip indicating the date of purchase and retailer’s name.
End-User License Agreement 40 Copyright © 2014 Lumigon A/S - All rights reserved
Lumigon’s End-User License Agreement for Software PLEASE READ THIS CAREFULLY BEFORE USING THE SOFTWARE INCLUDED WITH OR ACCESSIBLE THROUGH YOUR LUMIGON PRODUCT. This End-User License Agreement (“EULA”) is a legal agreement between you, the end user (either an individual or an entity), and Lumigon A/S and its suppliers and licensors (collectively referred to as “Lumigon”) for all the relevant software included with or accessible through your Lumigon Product (“Software”).
vi. add, integrate or combine any other software with the Software. 5. Disclaimer of warranty 2.2 You shall only use the Software and Documentation in a manner that complies with all applicable laws in the jurisdictions where you use the Software and Documentation, including but not limited to applicable copyright, patent, trademark and/or other intellectual property laws and export regulations. THE SOFTWARE, DOCUMENTATION, AND CONTENT ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND.
7. Indemnification 7.
PUNITIVE DAMAGES OF ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS OF THE FORESEEABILITY THEREOF OR WHETHER LUMIGON OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
