General Illumination LUXEON 3014 Hot-color targeted industry standard package for uniform light LUXEON 3014 is an industry standard compatible footprint for ease of installation into existing 3014 sockets and stays consistent with a 3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted at operating conditions — 65°C. This low-power device is an ideal choice when uniformity and reduction in spottiness is necessary for indoor designs.
Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Information Part Number Nomenclature LUXEON 3014 is tested and binned at Tj = 25°C with a drive current of 60mA DC.
Product Selection Product Selection Guide for LUXEON 3014 Low-Power LEDs Junction Temperature = 25°C Table 1. Typical Performance Characteristics at 30mA & 60mA with a Junction Temperature = 25°C [1, 2] Nominal CCT Part Number Minimum CRI [1] Minimum Luminous Flux (lm) @ 60mA Typical Luminous Flux (lm) Typical Forward Voltage (Vf) [4] Typical Efficacy (lm/W) [5] 30mA [5] 60mA 60mA 30mA 60mA 2700K L130-2780001400001 80 18 11 22 3.1 133 118 3000K L130-3080001400001 80 19 12 22 3.
Absolute Maximum Ratings Table 3. Parameter Maximum Performance DC Forward Current Peak Pulsed Forward Current 100mA 120mA [1, 2] ESD Sensitivity Class 2 HBM per ANSI/ESDA/JEDEC JS-001-2012 Operating Case Temperature @ 60mA -40°C - 85°C Soldering Temperature JEDEC 020D 260°C Storage Temperature -40°C - 100°C LED Junction Temperature 100°C Allowable Reflow Cycles 3 Reverse Voltage [3, 4] -5V Notes for Table 3: 1.
Reflow Soldering Characteristics Figure 1. Temperature Profile for Table 5. Table 5.
Mechanical Dimensions and Package Information Mechanical Dimensions Figure 2. Notes for Figure 2: 1. All dimensions are in millimeters. 2. Tolerance ±0.10mm. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Solder Pad Design Figure 3. Notes for Figure 3: 1. The drawing above shows the recommend solder pad layout on the Printed Circuit Board (PCB). 2. Application Brief AB208 provides extensive details for this layout. In addition, the .drawing files are available at www.lumileds.com. Package Information Table 6.
Characteristic Curves Relative Spectral Distribution vs. Wavelength Junction Temperature = 25°C; Test Current = 60mA Figure 4. Color spectrum, L130-xx80-0014-00001. Relative Light Output Characteristics over Junction Temperature Test Current = 6mA Figure 5. Relative light output vs. junction temperature, L130-xx8001400001. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Typical Forward Current Characteristics Forward Current vs. Forward Voltage for L130-xx80001400001 Junction Temperature = 25°C Figure 6. Typical forward current vs. forward voltage, L130-xx8001400001. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Typical Light Output Characteristics Relative Light Output vs. Forward Current Junction Temperature = 25°C Figure 7. Typical forward current vs. forward voltage, L130-xx8001400001. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Typical Radiation Patterns Radiation Pattern in Cartesian Coordinate System Junction Temperature = 25°C Figure 8. Typical spatial radiation pattern, L130-xx8001400001. Radiation Pattern in Polar Coordinate System Junction Temperature = 25°C Figure 9. Typical polar radiation pattern, L130-xx8001400001. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Emitter Packaging Emitter Pocket Tape Packaging Figure 10. Notes for Figure 10: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. The maximum number of consecutive missing LEDs is two. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Emitter Reel Packaging Figure 11. Notes for Figure 11: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. 7 inch reel-3000 pieces per reel. 4. Minimum packing quantity is 500 pieces. 5. The maximum number of consecutive missing LEDs is two. 6. In accordance with EIA-481-1-B specification. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage (Vf ). Decoding Product Bin Labeling LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel.
Forward Voltage Bins Table 8. Vf Bin for L130-xx80014-00001 Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) T 2.8 2.9 V 2.9 3.0 W 3.0 3.1 X 3.1 3.2 Y 3.2 3.3 Z 3.3 3.4 Note for Table 8: 1. Tested and binned at 25°C, If=60mA. 2. Forward voltage test tolerance: ±0.1 volts. DS208 LUXEON 3014 Product Datasheet 20141216 ©2015 Lumileds Holding B.V. All rights reserved.
Color Bin Structure The LUXEON 3014 is hot color targeted so that at 65°C, the color is within ANSI. Typical bin structure at 65°C. In application conditions, the LED temperature rises and at 65°C the typical color bins will be as shown. Note: Bin *N will represent the entire ANSI bin for that corresponding CCT. For example, bin 7N will represent the entire bin for 3000K ANSI. L130-2780-0014-00001 Color Bin Structure 0.450 0.440 0.430 8J 0.420 8K 8F 8E y 0.410 8D 8G 8H 0.400 8M 8L 2580 0.
L130-3080-0014-00001 Color Bin Structure 0.445 0.435 0.425 7K 0.415 7J y 7E 7F 0.405 7D 0.395 7M 7H 7L 2870K 0.385 0.375 7G 3200K 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x Figure 13. 3000K 1/9th color bin structure. Table 10. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3000K Single 3-step MacAdam ellipse (0.4338, 0.403) 0.00834 0.00408 53.
L130-3580-0014-00001 Color Bin Structure 0.430 0.420 0.410 6K 0.400 6F 6J y 6E 6D 0.390 6G 6L 6H 0.380 3250K 6M 0.370 3750K 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x Figure 14. 3500K 1/9th color bin structure. Table 11. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.
L130-4080-0014-00001 Color Bin Structure 0.420 0.410 0.400 0.390 5F 5J y 0.380 5E 5D 5L 5G 0.370 5K 5H 3750K 5M 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x Figure 15. 4000K 1/9th color bin structure. Table 12. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72° 4000K Single 5-step MacAdam ellipse (0.
L130-5080-0014-00001 Color Bin Structure 0.390 0.380 3K 0.370 3F 3J 0.360 3E y 3G 3D 0.350 3L 3H 4750K 3M 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x Figure 16. 5000K 1/9th color bin structure. Table 13. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62° 5000K Single 5-step MacAdam ellipse (0.3447, 0.
L130-5780-0014-00001 Color Bin Structure 0.370 0.360 2K 0.350 2F 2J y 2E 0.340 2G 2D 2L 5250K 2H 0.330 2M 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 17. 5700K 1/9th color bin structure. Table 14. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09° 5700K Single 5-step MacAdam ellipse (0.3287, 0.
L130-6580-0014-00001 Color Bin Structure 0.365 0.355 0.345 1K 1F 0.335 1J y 1E 0.325 1D 1G 1L 6000K 1H 1M 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 18. 6500K 1/9th color bin structure. Table 15. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57° 6500K Single 5-step MacAdam ellipse (0.
About Lumileds Lumileds is the light engine leader, delivering innovation, quality, and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit www.lumileds.com. ©2015 Lumileds Holding B.V.