Datasheet

DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved. 15
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux, color and forward
voltage (V
f
).
Decoding Product Bin Labeling
LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin
values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable
bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for
consistency in a given application.
Reels for all emitters are labeled with the CAT code following the format below.
ABCD
Where:
A = Flux bin (H etc.)
B & C = Color bin (For example 8D, 8E, 8F, etc.)
D = V
f
bin
Luminous Flux Bins
Table 6 and Table 7 list the standard photometric luminous ux bins for LUXEON 3030 2D mid-power emitters
(tested and binned at 120mA and a junction temperature of 25°C). Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all
colors. Please contact your Lumileds representative for the supportable ux bins.
Table 6.
Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm)
Z 50 55
A 55 60
B 60 65
C 65 70
D 70 75
E 75 80
F 80 85
G 85 90
H 90 95
J 95 100
K 100 105
L 105 110
M 110 115
N 115 120
P 120 125
Q 125 130
Note for Table 6:
1. Tested and binned at 25°C, I
f
=120mA. Tester tolerance: ±7.5%.