Datasheet

ManualsBrandsLUMILEDS ManualsHighPower-LEDsHighPower LED Cold white 97 lm 116 ° 6.1 V 240 mA

General IllumInatIon

RoHS

COMPLIANT

LUXEON 3030 2D is the rst hot-color targeted mid-power LED.

Hot-color targeting ensures that the LEDs are within color target at

application conditions — 85°C. Using an industry standard packaging

of 3.0mm x 3.0mm x 0.5mm and 6V surface-mount emitter solution,

LUXEON 3030 2D comes in all ANSI CCTs and delivers the ecacy and

reliabilty required for indoor illumination markets.

luXeon 3030 2D

High ux, hot-color targeted 6V package

Features anD BeneFIts PrImary aPPlIcatIons

Industry standard package enables drop-in replacement for existing

3030 packages

Downlights

1/9

micro-color binning enables tight color control High Bay & Low Bay

Superior luminous ux at max current for reduced LED count Lamps

Hot-color targeting ensures that color is within ANSI bin at typical application

conditions, 85°C

Enables 3-, 4-, 5-step MacAdam ellipse kits

Summary of content (25 pages)

PAGE 1
General Illumination LUXEON 3030 2D High flux, hot-color targeted 6V package LUXEON 3030 2D is the first hot-color targeted mid-power LED. Hot-color targeting ensures that the LEDs are within color target at application conditions — 85°C. Using an industry standard packaging of 3.0mm x 3.0mm x 0.5mm and 6V surface-mount emitter solution, LUXEON 3030 2D comes in all ANSI CCTs and delivers the efficacy and reliabilty required for indoor illumination markets.
PAGE 2
Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
General Information Part Number Nomenclature LUXEON 3030 2D is tested and binned at Tj = 25°C with a drive current of 120mA DC. The part number designation is explained as follows: L1 3 0 -AAB B 0 0 C C 0 0W2 1 Where: AA — designates CCT (for example, 2700K = 27) BB — designates CRI (70, 80 and 90) CC — designates last 2 digits of 3030 package For example, a LUXEON 3030 2D 2700K 80CRI emitter has the following part number.
PAGE 4
Product Selection Product Selection Guide for LUXEON 3030 2D Junction Temperature = 25°C Table 1.
PAGE 5
Electrical Characteristics Junction Temperature = 25°C, Test Current @ 120mA Table 2. Forward Voltage Vf [1] [3] (V) Part Number Minimum Typical Maximum 5.8 6.1 6.6 Typical Temperature Coefficient of Forward Voltage Between 25°C and 85°C [2] DVF / DTJ L130-2780003000W21 L130-2790003000W21 L130-3080003000W21 L130-3090003000W21 L130-3580003000W21 L130-4070003000W21 L130-4080003000W21 -2.0 to -4.
PAGE 6
Absolute Maximum Ratings No parameter can surpass its maximum rating under any condition. Care must be maintained to insure junction and case temperatures are properly derated with current. Table 3.
PAGE 7
Reflow Soldering Characteristics Figure 1. Temperature Profile for Table 5. Table 5.
PAGE 8
Mechanical Dimensions and Package Information Mechanical Dimensions Figure 2. Notes for Figure 2: 1. All dimensions are in millimeters. 2. Tolerance: X.X: ±0.1mm. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 9
Recommended Soldering Pad Pattern and Metal Solder Stencil Aperture Figure 3. Package Dimensions of Tape (Unit: mm) Figure 4. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 10
Package Dimensions of Reel Figure 5. Reel dimensions. Package Labeling Figure 6. Label information. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 12
Relative Spectral Distribution L130-xx80003000W21 80CRI Relative Intensity vs. Wavelength Figure 8. L130-xx80003000W21 80CRI typical color spectrum at solder pad temperature = 25°C, forward current = 120mA. L130-xx70003000W21 70CRI Relative Intensity vs. Wavelength Figure 9. L130-xx70003000W21 70CRI typical color spectrum at solder pad temperature = 25°C, forward current = 120mA. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 13
Relative Flux vs. Temperature Figure 10. Typical relative light output vs. solder pad temperature, forward current = 120mA. Relative Flux vs. Forward Current Figure 11. Typical relative light output vs. forward current = 120mA, solder pad temperature = 25°C. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 14
Forward Current vs. Forward Voltage Figure 12. Typical forward current vs. forward voltage, solder pad temperature = 25°C. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 15
Typical Radiation Patterns Radiation in Cartesian coordinate system Figure 13. Typical radiation pattern in Cartesian coordinate system. Radiation Pattern in Polar Coordinate System Figure 14. Typical radiation pattern in Polar coordinate system. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 16
Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel.
PAGE 17
Forward Voltage Bins Table 7. Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) F 5.6 5.8 G 5.8 6.0 H 6.0 6.2 J 6.2 6.4 K 6.4 6.6 Note for Table 7: 1. Tested and binned at 25°C, If=120mA. DS207 LUXEON 3030 2D Product Datasheet 20150319 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 18
Color Bin Structure The LUXEON 3030 2D is hot color targeted so that at 85°C, the color is within ANSI. Typical bin structure at 85°C In application conditions, the LED temperature rises and at 85°C the typical color bins will be as shown. Note: Bin *N will represent the entire ANSI bin for that corresponding CCT. For example, bin 7N will represent the entire bin for 3000K ANSI. L130-27xx003000W21 Color Bin Structure 0.450 0.440 0.430 8J CIE 1931y 0.420 8E 0.410 8D 8G 8H 0.400 8L 8M 0.
PAGE 19
L130-30xx003000W21 Color Bin Structure 0.445 0.435 0.425 7K CIE 1931 y 0.415 7J 7E 7F 0.405 7D 0.395 7M 7H 7L 2870K 0.385 0.375 7G 3200K 0.365 0.4050.410 0.415 0.420 0.4250.430 0.435 0.4400.445 0.450 0.455 0.4600.465 CIE 1931 x Figure 16. 3000K 1/9th color bin structure. Table 9. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3000K Single 3-step MacAdam ellipse (0.4338, 0.403) 0.00834 0.00408 53.
PAGE 20
L130-35xx003000W21 Color Bin Structure 0.420 0.410 6K 0.400 6E y 6F 6J 6D 0.390 6G 6H 0.380 6L 6M 3250K 0.370 3750K 0.360 0.380 0.390 0.400 0.410 0.420 0.430 0.440 x Figure 17. 3500K 1/9th color bin structure. Table 10. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 53.22° 0.01545 0.
PAGE 21
L130-40xx003000W21 Color Bin Structure 0.420 0.410 0.400 CIE 1931 y 0.390 5K 5F 5J 0.380 5E 5D 5G 0.370 5L 5H 3750K 5M 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 CIE 1931 x Figure 18. 4000K 1/9th color bin structure. Table 11. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.
PAGE 22
L130-50xx003000W21 Color Bin Structure 0.390 0.380 3K 0.370 3F 3J CIE 1931 y 0.360 3E 3G 3D 0.350 3L 3H 4750K 3M 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 x 0.350 0.355 0.360 0.365 Figure 19. 5000K 1/9th color bin structure. Table 12. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62° 5000K Single 5-step MacAdam ellipse (0.
PAGE 23
L130-57xx003000W21 Color Bin Structure 0.370 0.360 2K 0.350 2F 2J 2E y 0.340 2D 2G 2L 5250K 2H 0.330 2M 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 20. 5700K 1/9th color bin structure. Table 13. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09° 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.
PAGE 24
L130-65xx003000W21 Color Bin Structure 0.365 0.355 0.345 CIE 1931 y 1K 1F 0.335 1J 1E 0.325 1D 1G 1L 6000K 1H 1M 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 21. 6500K 1/9th color bin structure. Table 14. Nominal ANSI CCT Color Space Target Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.
PAGE 25
About Lumileds Lumileds is the light engine leader, delivering innovation, quality, and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit www.lumileds.com. ©2015 Lumileds Holding B.V.