Datasheet

DS209 LUXEON 3020 Product Datasheet 20150313 ©2015 Lumileds Holding B.V. All rights reserved. 4
Electrical Characteristics
Electrical Characteristics
Thermal Pad Temperature = 25°C, Test Current @ 120mA
Table 2.
Part Number
Forward Voltage V
f
[1]
(V)
Temperature Coecient of
Forward Voltage between 25°C and 85°C
DV
F
/ DT
J
Minimum Typical Maximum
L130-2780002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-2790002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-3080002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-3090002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-3580002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-3590002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-4070002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-4080002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-4090002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-5070002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-5080002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-5770002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-5780002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-6570002011001 2.85 3.05 3.35 -2.0 to -4.0
L130-6580002011001 2.85 3.05 3.35 -2.0 to -4.0
Notes for Table 2:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between T
j
= 25°C and T
j
= 85°C.
Absolute Maximum Ratings
Table 3.
Parameter Maximum Performance
DC Forward Current 240mA
Peak Pulsed Forward Current 300mA
[1, 2]
LED Junction Temperature
[1]
125°C
ESD Sensitivity 8000V, JEDEC 22A-114, Human Body Model (HBM)
Operating Case Temperature -40°C - 105°C
Storage Temperature -40°C - 105°C
Soldering Temperature JEDEC 020D 260°C
Allowable Reow Cycles 3
Reverse Voltage (Vr)
[3, 4]
-10V
Notes for Table 3:
1. Ripple current with a frequency of 50-150 Hz is allowed as long as the average of the current waveform is below 240mA and the maximum of the current waveform is lower than 300mA.
2. At 10% duty cycle and pulse width < 100µS.
3. LUXEON 3020 LEDs are not designed to be driven in reverse bias.
4. At a maximum reverse current of 10µA.