Installation Instructions

PC Installation Instructions
Back of Monitor
Front of Stand
Stand
Parts Inventory
2
Plug the blue VGA connector into
the back of the monitor.
Back of Monitor
VGA Connector connected
to the back of monitor.
3
Attach the monitor to the stand by lining up the top tabs with the tab
slots on the back of the monitor. Lower the monitor onto the tabs and
tilt the monitor until it locks into place.
4
Connect the power cord to the monitor.
Power cord connected
to the monitor.
5
Insert the PC into the sleeve.
Sleeve
Slide lock to the left
to unlock the sleeve.
PC
Sleeve
Slide the lock to the
right to lock the PC in
the sleeve.
6
Slide the sleeve onto the back of the stand.
Back
of the
Stand.
Slide the PC in the sleeve onto the
back of the stand.
1
Note: For additional installation information, refer to the PC set up instructions that you received with your PC.
Keyboard
Mouse
Monitor
Sleeve
PC
Not Used
VGA Cable
Cover
Power Cord
Tab Slots
Bracket Tabs