Instructions / Assembly

1
2. Connecting the electrical wires
Wrap the ground wire from the xture around the
ground screw (BB) on the mounting strap (EE). Use a
wire connector (AA) to connect the ground wire from the
xture to the ground wire from the outlet box.
• Use a wire connector (AA) to connect the white wire from
the xture to the white wire (neutral wire) from the outlet
box.
• Use a wire connector (AA) to connect the black wire from
the xture to the black wire (live wire) from the outlet box.
Wrap the three wire connections with electrical tape for a
more secure connection.
• Position the wires back inside the outlet box.
1. Attaching the mounting strap to the outlet box
• Screw the hex nut (DD) about 1 in. onto the nipple (FF).
• Screw the nipple (FF) about 1/2 in. into the mounting
strap (EE).
Tighten the hex nut (DD) against the mounting strap (EE)
to secure the nipple (FF).
• Mount the mounting
strap (EE) to the outlet
box using the two
outlet box screws (CC).
INSTALLATION
PLANNING INSTALLATION
Read all instructions before assembly. Before starting installation of this xture or removal of a previous xture, disconnect the power by turning
o the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such
as carpet or cardboard.
PACKAGE CONTENTS
Use and Care Guide
LED INTERIOR FLUSHMOUNT
Model #LT1012, LT1013
Model #IPX8011LS-2
Model #LT1014, LT1015
Model #IPX8011LM-2
Model #LT1016, LT1017
Model #IYG8011L-2
LUMINOSA

Summary of content (4 pages)