Spec Sheet

next to the eyepiece will light on, indicating the IR illuminator is operating. The

image will remain full color. To switch image to night vision green – press IR

button again. To switch image to B&W press the IR button again. To turn the IR

illuminator OFF press the same IR button again once. The red light indicator

will disappear when the IR illuminator is properly turned off.

It is also possible to utilize different color image options without the use of IR

illuminator by selecting either Black & White or Sephia (NV green) option in the

main menu. Selection is done with the long IMAGE button (11) and

confirmation is done by short-pressing the IR button (13). Please note – after

selecting either B&W or Sephia option this way, once you activate the IR

illuminator, this option will be disconnected automatically.

When using the infrared illuminator it is important to remove the red daylight

color enhancing filter and also remember that like a flashlight, the IR

illuminator is brightest when used in short distances. As the distance increases,

the intensity of the infrared light fades away.

Extended range IR illuminators are available (model LN-EIR-2, or LN-ELIR-2),

which can be mounted into the side accessory mount socket (4). The thread is

a standard ¼” type and will accept any accessory with mounting screw of that

size.

TAKING PICTURES AND RECORDING HD VIDEOS:

WE STRONGLY RECOMMEND MOUNTING YOUR DEVICE ONTO A

STEADY TRIPOD WHEN RECORDING VIDEO OR TAKING STILL IMAGES –

PARTICULARLY WHEN WATCHING DISTANT OBJECTS AND/OR

UTILIZING ZOOM FUNCTION

Your digital viewer has the ability to take pictures and record HD videos onto

the external Micro-SD card. 8GB card is included

with your unit and it is already installed into the

SD-card slot. The Micro-SD card can be upgraded

up to 128GB, which is especially useful if you plan

to record a lot of videos. To change the SD-card,

open the SD-card/USB compartment (7) by

carefully sliding the latch to the right. The door

will pop open as you see on the image on the

previous page. Remove the included 8GB card by pressing onto its end. It will

pop out of its slot (15) as shown on the image. Gently remove the card and

replace it with the new one by pressing it straight forward until it is securely

locked in the slot. Close the compartment door and lock it by sliding the latch

to the left.