Spec Sheet

CHOOSING CORRECT ISO (SENSITIVITY) SETTING:
Your digital monocular comes with 5 user-selectable ISO (sensitivity) settings,
plus an AUTO mode. All units come with AUTO mode as a default setting and in
most conditions this mode is the best choice for viewing and recording. In
certain conditions where extra sensitivity is desired (such as Sky Watching
where small light objects need to be constantly seen) it is better to select one
of the highest ISO settings (between 1600 and 6400) for constant sensitivity,
which prevents any sudden bright light source to lower the overall system
sensitivity. To choose the ISO setting, access the menu by long pressing the IR
button (13) and selecting desired mode with IMAGE button (11) and confirming
with IR button (13)
CONNECTING TO EXTERNAL VIDEO SOURCE:
You can connect your device to the TV/VCR/DVR via the RCA-type video cord
(included with your device). Connect the small end of the Video cable to the
Video Output (5) and then connect to the TV/Recorder. . NOTE – if you live
outside of the USA, you may need to switch the Video Output from NTSC to
PAL by accessing the menu (Press IR Button for 2 seconds and when Menu
appears select Video Format with Image button (11) and activate it with IR
button (13). Switch between NTSC and PAL formats by pressing the Image
Button and confirm your setting by pressing IR or REC button (depending on
the software version).
WI-FI LINK INSTRUCTIONS:
1. Download “ROADCAM” app on your Android
phone/tablet or on iPhone/iPad
2. Press PIC button for 3 seconds to activate your
monocular WI-FI setup. Look through the
eyepiece and observe the WI-FI link name and
Password. The Wi-Fi link is the first line of the
screen and the password is on the second line.
3. Find the Wi-Fi link (same as first
line shown on the unit’s LCD
display) on your smartphone or
tablet and connect to it.
4. Enter password (second line of the
unit’s LCD display) – NOTE: only
numbers after “:” are needed to be
entered – typical default password
is 12345678