Users Manual Part 1
Transmitter
Press once to turn on strobe.
Press again to turn on blue monitor light.
Press again to turn o.
When in blue monitor mode, blue LED will glow for approx
2 hours before automatically switching to strobe mode. You
can change back to monitor mode by pressing the button.
Strobe will be at full brightness for a minimum of 8 hours
even after the blue monitor mode is run for two hours after
full charge.
When in blue monitor mode, strobe will automatically start
when device is submerged in water and continue until
battery is depleted or user turns o via button push.
If unit is in o mode, strobe will automatically start when
device is submerged in water and continue until battery is
depleted or user turns o via button push.
Device charge time is approximately 1 hour 45 minutes to
full charge from being fully depleted. Less time is needed if
device has some charge left.
Any QI certied charger (similar to cell phone chargers) can
be used.
Transmitter Functions