Owners manual

NOTE: Actual application may vary slightly from illustrations.

Installation Steps

Page 3 of 3

Remove remaining tape liner by pulling on the free ends. Apply

pressure to flange to ensure proper adhesion of tape.

Hood shield

Hood

Align front of shield with front edge of hood.

Grille

Check position of hood shield. NOTE: Ensure that center flanges where tape will adhere are not in contact with top of grille.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Lund

branded products offered by Lund International, Inc. We take the utmost pride in our products

and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of

fit, durability, finish and ease of installation.

Lund

and the Lund

logo are trademarks of Lund International, Inc.

Lund International

800-241-7219 • Visit us at lundinternational.com

™

Remove adhesive backing and apply (2) bump

ons to hood surface.

Press and hold hood shield against the upper surface of hood.