I - Sheet Number I-B113301A1 Rev.
3” SIDEBAR BENT BOTH ENDS 04-‐12 NISSAN TITAN CREW CAB INSTALLATION INSTRUCTIONS PART# 22685133/ 23085133 PARTS LIST: 1 1 3 3 6 Driver/Left Sidebar Passenger/Right Sidebar Driver/Left Mounting Brackets Passenger/Right Mounting Brackets 8-‐1.
” SIDEBAR BENT BOTH ENDS 04-‐12 NISSAN TITAN CREW CAB 4. 5. 6. 7. 8. Lock Washer and (1) 8mm x 16mm Small Flat Washer through the remaining lower hole in the Bracket and into the threaded hole, (Figure 2). Do not tighten hardware at this time. Repeat Steps 2 – 3 to install the center and rear Mounting Brackets, (Figures 3 – 5).
3” SIDEBAR BENT BOTH ENDS 04-‐12 NISSAN TITAN CREW CAB Driver Side Installation Pictured Front 8mm Nylon Lock Nut 8mm x 24mm STD Flat Washer (Fig 3) Driver side Brackets installed.