Owners manual

• A trial fit is recommended to ensure proper positioning and fit.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
• Thoroughly clean the attachment surfaces with isopropyl alcohol (rubbing alcohol). Wipe completely dry.
• Ideal application temperature range is 70°F to 100°F (21°C to 38°C).
• Apply even pressure across the Rocker Guard surface to ensure proper adhesion.
• Avoid car washes and other wet conditions for 72 hours for best adhesion.
Panel Locations
Important Installation Notes
Clean TowelIsopropyl Alcohol
Panel Guard Components
NOTE: Repeat for opposite side of vehicle
Tools Required
NOTE: Actual product may vary from illustration.
Contents
Installation Instructions
I - Sheet Number LUNDRL07 Rev.A
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Page 1 of 4
Rhino Linings
®
Rocker Guards
Remove liner and apply Rocker Guards as follows:
2
2
3
3
3
4
4
1
1
5821255

Summary of content (4 pages)