Owners manual

NOTE: Actual application may vary slightly from illustrations.

Installation Steps

Page 2 of 2

3 4

5 6

Clean painted surface of hood where scoops will at-

tach with alcohol pad.

Peel back 2” of tape liner from each end of front flange. Position scoop on hood and apply pressure to exposed tape.

In its final position, remove remaining tape by pulling on free

ends. Apply pressure to all edges to ensure adhesion.

Remove adhesive tape to adhere inserts to hood scoop.

2”

5cm

If applicable

masking

tape

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Lund™ branded products offered by Lund International, Inc. We take the utmost pride in our products

and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of

fit, durability, finish and ease of installation.

masking

tape

Apply primer stick to the hood’s surface, inside of the

masking tape.

CAUTION: Read surface prep warning

on page 1 before continuing.

masking

tape

masking

tape

Adhere decal to side of hood scoop.

Lund

and theLund

logo are trademarks of Lund International, Inc.

Lund International, Lund Accessories Division

300 Horizon Drive, Suwanee, GA 30024

800-328-5863 • Visit us at lundinter

national.com

™