Instructions / Assembly

WWW.HOMEDEPOT.COM/HOMEDECORATORS

Please

contact 1-800-986-3460 for further assistance.

Installation

1 2

Installing the crossbar

CAUTION:

Never rely on the wall switch alone to turn

off

power.

□ Attach the crossbar (CC) to the junction box using the

crossbar screws (AA).

the fixture

onnecting the wires and installing

□ Connect the bare ground wire from the fixture to the ground

wire from the junction box by twisting a wire nut (

B) onto

ends of the wires. Connect the white wire from the

junction box to the white wire from the fixture (A) by twisting

a wire nut (BB) onto the bare ends of the wires. Connect the

black wire from the junction box to the black wire from the

fixture (A) by twisting a second wire nut (BB) onto the bare

ends of the wires.

Make sure wire connections are secure. Carefully place the

wires into the junction box. Then secure the fixture (A)

with

the fixed nuts (DD).

NOTE:

The ground wire is green.

the bare

PAGE 1
Installation 1 Installing the crossbar the wires and installing 2 Ctheonnecting fixture CAUTION: Never rely on the wall switch alone to turn off power. □ □ Attach the crossbar (CC) to the junction box using the crossbar screws (AA). Connect the bare ground wire from the fixture to the ground wire from the junction box by twisting a wire nut (BB) onto the bare ends of the wires.
PAGE 2
Installation (continued) (continued) 3 4 Installing the bulb and the lampshade Sealing the fixture □ Install the bulb (EE). Then install the lampshade (FF). Turn power back on at the circuit breaker and switch the wall switch to the ON position. □ Apply silicone caulking adhesive (not included) completely around the perimeter of the fixture (A) where the back meets the mounting surface to prevent water from seeping into the junction box.