User's Manual

ManualsBrandsLutron Electronics ManualsElectronicsSystem Bridging Timeclock

4. Configure the SBT. Use the SBT display to set

configuration.

5. Connect Serial Link (if applicable). Connect a

standard DB9 male connector to the RS-232 con-

nector on the SBT for communications with other

equipment.

6. Connect external input closures (optional). The

SBT accepts three low-voltage dry contact clo-

sures. Connect wiring for closures to input terminal

block if desired (see Wiring Diagram—page 3).

When using the input closures:

Verify compatibility of external devices. The input

closures are intended for use with devices that

provide outputs in the form of dry contact closure

outputs. The input closures may be used with

ground-referenced, solid-state outputs if the out-

puts have an on-state saturation voltage of less

than 2 V and an off-state leakage of less than

50 µA. Dry contact or solid-state outputs must be

capable of switching 18 V at 10 mA. The outputs

must stay in the closed or open states for at least

40 msec in order to be recognized by the SBT. If

there is any question as to whether the contact

closure device is compatible with these specifica-

tions, contact the manufacturer of that device.

PRELIMINARY—NOT FOR RELEASE

Installation

1. Find a suitable location for the SBT. Place the

SBT in a convenient and accessible location. See

RF Coverage Diagrams on page 5.

2. Mount the SBT. Mount SBT to wall using the

appropriate mounting hardware provided (see

Mounting Diagram). Orient the processor’s anten-

na for optimal performance. For most installations,

the antenna should be oriented vertically. Note:

DO NOT ground the SBT. DO NOT mount the SBT

in a metal enclosure.

3. Apply power to the SBT.

Verify LED lights

when powered

Plug in power

cord and

adapter

11.54"

(293mm)

(203mm)

1.25"

(32mm)

6.16"

(157mm)

6.7"

(170mm)

0.70"

(18mm)

Front View

(Port Cover removed)

Side View

5.77"

(147mm)

1.77"

(45mm)

Dimensions

Mounting Screw

Optional Mounting Screw

Mounting Diagram

Included:

Drywall Anchors (3)

Mounting Screws (3)

Masonry Anchors (3)

Mounting Screws (3)

Wall Anchors

(178mm)