User's Manual
6
PRELIMINARY—NOT FOR RELEASE
Troubleshooting Guide
Symptom Cause and Action
LCD is shut off.
• Press any key to restore the LCD.
No power available to SBT.
• Make sure adapter is plugged in.
• Faulty adapter.
• Check to make sure circuit breaker is not tripped or OFF.
No power available to unit.
• Make sure adapter is plugged in.
• Faulty adapter.
SBT not within 30 ft. (9 m) of controls.
• Place SBT within 30 ft. (9 m) of RF controls.
SBT not within 30 ft. (9 m) of controls.
• Place SBT within 30 ft. (9 m) of RF controls.
No power to Control
• Check circuit breaker.
• Check FASS
TM on Dimmers/Switches and their Accessory
Controls.
• Replace batteries in battery-powered controls.
Controls not addressed.
• Address controls using the SBT Setup Menus.
LCD Display is blank
Controls not communicating with SBT
SBT functions intermittently