User's Manual

R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
Standards:
• FCC approved. Complies with the limits for a Class
B digital device, pursuant to Part 15 of the FCC
rules
Power:
• Low-voltage PELV (Class 2: USA).
• Operating Voltage: 15 - 24 V , 500 mA maximum.
• AC adapter included (requires 120 V outlet).
Integration:
• Provides one 10/100 Base T (autosensing) Auto-
MDIX jack for connecting to an Ethernet network
using TCP/IP.
• Provides one DB9 RS232 jack for connecting to a
serial device.
• Baud rates supported over RS232: 9600, 38400,
115200.
Key Design Features:
• LED status indicators provide device diagnostics
• Power failure memory: if power is interrupted, when
the power is restored, device will retain all settings
that were in place prior to the interruption
System Communication and Capacity:
• Programming control interface communicates with
other Stanza system components through radio
frequency (RF) at 434 MHz
• Multiple RF channels and thousands of system
addresses prevent interference between systems
• When used only for commissioning and
programming, programming control interface does
not count toward the single-system maximum of 31
Stanza devices
Specifications
sz-ci-prg-2 06.06.08
Wireless Control InterfacesSZ-CI-PRG
StanzaTM
Environment:
• Ambient operating temperature: 32 - 104 °F
(0 - 40 °C)
• Maximum 90% non-condensing relative humidity
• Indoor use only
• Cannot be mounted in a metal enclosure (interferes
with RF reception).
Warranty:
• 1-year limited warranty
• 2-year full parts and labor warranty, with 8-year pro-
rated parts replacement on commissioned systems
Color/Finish Codes:
• Black only
2