User's Manual

R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
2.50
(63.5)
3.75
(95.3)
4.26
(108.2)
5.26
(133.6)
1.06
(26.9)
Mounting holes
Mounting
1. Mount the control interface directly on a surface, as
shown in the Mounting Diagram, using screws (not
included). When mounting, provide sufficient space
for the antenna and connecting cables. The unit can
be mounted in any orientation.
The unit cannot be mounted in a full metal
enclosure. The antenna is not removable or remotely
mountable.
Mount in an accessible location for convenient
access to addressing switches, LEDs, and terminal
blocks.
2. Connect wiring as shown in the Wiring Diagram
(next page).
5.26
4.263.75
2.50
1.06
Control Interface
Surface
Mounting Diagram
Dimensions
Dimensions are in inches (mm)
6.0
(152.4)
sz-ci-prg-3 06.06.08
Wireless Control InterfacesSZ-CI-PRG
StanzaTM
Terminal
blocks on this
side
LEDs and
addressing
switches on this
side
3