User's Manual

ManualsBrandsLutron Electronics ManualsElectronicsWi-Fi enabled bridge

Vive hub

Model numbers

HJS-2-FM

HJS-2-SM

HJS-1-FM

HJS-1-SM

Replacement Model Numbers

PS-J-20W-UNV = Vive Hub External Power Supply

ETPH-MOUNT-FM = Flush Mount Installation Bracket

ETPH-MOUNT-SM = Surface Mount Installation Bracket

Product Description

The Vive hub provides a centralized connection point for Lutron

Vive

devices such as the

wireless PowPak

dimming and switching modules, PowPak

Individual Fixture Controllers, wireless Maestro

dimmer and

switches,Pico

wireless remotes, Radio Powr Savr

occupancy sensors, daylight sensors, receptacle controls, and stairwell fixture

controls.

Important Notes

1. Vive hub is part of a system and cannot be used to control a load without a compatible system

device. Refer to the www.lutron.com and the instruction sheets of the system device(s) for

installation information.

2. Clean Vive hub with a soft damp cloth only. DO NOT use any chemical cleaners.

3. Vive hub is intended for indoor use only. Operate between 32 °F and 104 °F (0 °C and 40 °C).

4. DO NOT paint Vive hub.

5. The range and performance of the wireless system is highly dependent on a variety of

complex factors such as:

· Distance between system components

· Geometry of the building structure

· Construction of walls separating system components

· Electrical equipment located near system components

Vive hub wireless range:

· 75 ft through walls

6. Metal objects block wireless communication. Avoid installing Vive hub on or within metal

surroundings.

Summary of content (7 pages)

PAGE 1
Vive hub Model numbers HJS-2-FM HJS-2-SM HJS-1-FM HJS-1-SM Replacement Model Numbers PS-J-20W-UNV = Vive Hub External Power Supply ETPH-MOUNT-FM = Flush Mount Installation Bracket ETPH-MOUNT-SM = Surface Mount Installation Bracket Product Description The Vive hub provides a centralized connection point for Lutron® Vive® devices such as the wireless PowPak® dimming and switching modules, PowPak® Individual Fixture Controllers, wireless Maestro® dimmer and switches,Pico® wireless remotes, Radio Powr Savr® occ
PAGE 2
Included Components Please see 041-336 for this section. We can just copy and paste that information The only thing different is the titles of the components. Use Vive Module, Ceiling Mount Adapter and Screw, Surface Mount Adapter and Screws For “Tools You May Need” copy and paste is fine Technical Assistance For questions concerning the installation or operation of this product, call the Lutron Technical Support Center. Please provide exact model number when calling. U.S.A.
PAGE 3
FCC/ IC Information: This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user's authority to operate this equipment.
PAGE 4
Instructions Getting started Key Features · Easy Installation. Vive hub can be mounted on a variety of ceiling materials (thickness ranging from 1/4 in to 11⁄4 in [6 mm to 32 mm]) with the flush mount bracket provided. · Easy Set-up. Vive hub can be set-up easily with any Wi-Fi enabled smart phone or tablet. No special app is required. · ClearConnectTM Technology. Up to 250 wireless load control devices. Installation The Vive hub installation procedure is outlined below.
PAGE 5
Installation Instructions (Please read before installing) 3 Wiring the power supply Tools Required: Wire cutter/stripper, small flat-head screwdriver Optional: Power drill, mounting screws 1 Important Notes: Adherence to these specifications is necessary to ensure a safe and successful installation. 1.1 All wiring must be in accordance with national and local electrical codes. 1.2 Power supply should be installed by a qualified electrician. 1.
PAGE 6
5. Wiring 1. 2. 3.
PAGE 7
6. Programming (Please add a drawing of a person holding a phone) 1. Open Wi-Fi settings on smart device 2. Select Wi-Fi SSID as shown below Wi-Fi SSID: lutron-00:00:00:00:00:00 Wi-Fi MAC Address: 00:00:00:00:00:00 Ethernet MAC Address: 00:00:00:00:00:00 3. If the browser does not automatically load, open browser and enter Vive. 7. Troubleshooting (See Caseta Bridge) Resetting the password 1. Press the button, all 8. LED feedback 9.