Installation Guide
INSTALLATION
fig. 8
4. Mount downlight in ceiling
Note: For optimal radio communication, ensure that the radio dome is not above or adjacent to
anything metallic.
a. Use bar stock or CChannels (not provided) to mount the D3 in the ceiling. The supports should
go through the holes in the butterfly brackets and can be used to suspend the D3 without screws.
(see fig. 8)
Note: After mounting, the D3’s collar will need to be flush to the ceiling plan or ~⁄th (1.5875 mm)
inches above it.
b. Wire-tie at least one bracket to the deck using at least one tie.
5.
Optional:
If installing a square fixture, loosen the collar's two outer screws, freeing the collar for
rotation, which then can be aligned to the fixtures per design.
a. Realign the collar using its v-shaped notches and an alignment string or laser.
b. Re-tighten the screws to lock the collar’s new position.
REVISIONS
ZONE
REV.
ECO DESCRIPTION
DATE
APPROVED
C
A
C
E
E
A
IN DESIGN
1:1
11
2/12/2016
JOHN MICHALKO
TOLERANCES:
C
PROPRIETARY AND CONFIDENTIAL
810-000037-XX
D3, AIMABLE, ROUND
COLLAR, 60HZ, XX DEGREE
01
SCALE:
NOTES:
D3 INSTALLATION GUIDE|11
P/N 040444 Rev D
© 2019 Ketra, Inc. All rights reserved