Operating Guide

128
www.lutron.com | 1.800.523.9466 |
Dimmer model numbers
Dimmer, fan and fan/light control
model numbers
Incandescent/halogen dimmers
Preset dimmers
Single-pole AY-600P-CC
3
120 V 600 W
Single-pole AY-10P-CC
3
120 V 1000 W
3-way AY-603P-CC
3
120 V 600 W
3-way AY-103P-CC
3
120 V 1000 W
Preset dimmers with locator light
Single-pole AY-600PNL-CC
3
120 V 600 W
Single-pole AY-10PNL-CC
3
1000 W
3-way AY-603PNL-CC
3
120 V 600 W
3-way AY-103PNL-CC
3
120 V 1000 W
eco-dim
® preset dimmer
3-way/single-pole AY-603PG-EE
2
120 V 600 W
eco-dim model guarantees at least 15% energy
savings compared to a standard switch.
Magnetic low-voltage dimmers
Preset dimmers
Single-pole AYLV-600P-CC
3
120 V 600 VA (450 W)
3-way AYLV-603P-CC
3
120 V 600 VA (450 W)
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
3-wire fluorescent dimmers*
Preset dimmers
3-way/single-pole AYF-103P-CC
3
120 V 8 A
3-way/single-pole AYF-103P-277-CC
3
277 V 6 A
For use with Hi-lume
®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
Also compatible with Hi-lume
® LED driver.
No derating required if ganged.
Adjustable low-end trim.
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
Preset dimmers
3-way/single-pole AYF-103P-CC
3
120 V 8 A
3-way/single-pole AYF-103P-277-CC
3
277 V 6 A
For use with Hi-lume LED driver only.
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
No derating required if ganged.
Adjustable low-end trim.
Fan control
Fan control—quiet 3-speed
3-way/single-pole
120 V 1.5 A AYFSQ-F-CC
3
Fan/light control
Fan control and dimmer—quiet 3-speed
Single-pole fan control AY2-LFSQ-CC
3
120 V 1.5 A (left)
Single-pole dimmer 120 V 300 W
incandescent/halogen (right)
Traditional
wallplate opening
Ariadni® dimmers and fan controls
All models must be derated if ganged unless
otherwise noted, see pg. 170.
For more information on ballasts, visit
www.lutron.com/ballasts.
*Requires neutral wire connection.
CC
3
: Gloss color codes, see pg. 125
EE
2
: Available in White (WH), Ivory (IV), Almond
(AL) and Light Almond (LA)
(Wallplates not included, order separately,
see pg. 168)