Specification Sheet

Dimmers
•
Paddle turns on/off
•
Slide up to brighten,
down to dim
•
LED
+
dimmers provide reliable
dimming of dimmable LEDs/
CFLs, as well as halogens and
incandescents
Dimmable LED/CFL (screw-base) dimmers
Incandescent/halogen dimmers
LED
+
dimmers
3-way/single-pole DVCL-153P-XX
1
120 V 150 W (LED/CFL), DVSCCL-153P-XX
2
600 W (Inc)
3-way/single-pole DVCL-253P-XX
1
120 V 250 W (LED/CFL), DVSCCL-253P-XX
2
600 W (Inc)
350 W (Hi-lume 1% LED driver, max. 8)
Visit lutron.com/LEDfinder for our online
compatibility tool.
Adjustable low-end trim.
Dimmable LED/CFL (screw-base) dimmers
Incandescent/halogen dimmers
Electronic low-voltage dimmers
Reverse-phase dimmers*
3-way/single-pole DVRP-253P-XX
1
120 V 250 W (LED/CFL), DVSCRP-253P-XX
2
500 W (Inc), 500 W (ELV)
When dimming LEDs/CFLs, only bulbs marked
or rated as dimmable with reverse-phase may
be used.
Visit lutron.com/LEDfinder for our online
compatibility tool.
No low-end trim.
Incandescent/halogen dimmers
Dimmers
Single-pole DV-10P-XX
1
120 V 1000 W DVSC-10P-XX
2
3-way/ DV-103P-XX
1
120 V 1000 W DVSC-103P-XX
2
Magnetic low-voltage dimmers
Dimmers
Single-pole DVLV-600P-XX
1
120 V 600 VA (450 W) DVSCLV-600P-XX
2
Single-pole DVLV-10P-XX
1
120 V 1000 VA (800 W) DVSCLV-10P-XX
2
3-way/ DVLV-603P-XX
1
120 V 600 VA (450 W) DVSCLV-603P-XX
2
3-way/ DVLV-103P-XX
1
120 V 1000 VA (800 W) DVSCLV-103P-XX
2
The stated VA (volt-ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (watt) rating is the
maximum lamp wattage based on assumed 20%
transformer loss.
Electronic low-voltage dimmers
Dimmers*
Single-pole DVELV-300P-XX
1
120 V 300 W DVSCELV-300P-XX
2
3-way DVELV-303P-XX
1
120 V 300 W DVSCELV-303P-XX
2
* Requires neutral wire connection * Requires neutral wire connection
XX
1
: Gloss color codes
XX
2
: Satin color codes
Wallplates not included. Order separately.
3-wire LED driver/fluorescent
ballast dimmers
Dimmers*
3-way/single-pole DVF-103P-XX
1
120 V 8 A DVSCF-103P-XX
2
3-way/single-pole DVF-103P-277-XX
1
277 V 6 A DVSCF-103P-277XX
2
No derating required if ganged.
Adjustable low-end trim.
0-10 V LED/fluorescent fixture dimmers (current
sink control)
Dimmers
3-way/single-pole DVSTV-XX
1
120–277 V 8 A DVSCSTV-XX
2
50 mA max control current
No power pack required.
No derating required if ganged.
0-10 V LED/fluorescent fixture dimmers
(current sink control – power packrequired)
Dimmers*
Single-pole DVTV-XX
1
30 mA max control current DVSCTV-XX
2
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
power pack: PP-DV or PP-347H.
Compatible with any IEC 60929 Annex E
compliant driver or ballast.
No derating required if ganged.
XX
1
: Gloss color codes
XX
2
: Satin color codes
Wallplates not included. Order separately.
Tu-Wire fluorescent ballast dimmers
Dimmers
3-way/single-pole DVFTU-5A3P-XX
1
120 V 5 A DVSCFTU-5A3P-XX
2
Compatible with Advance Mark X and Sylvania
POWERSENSE fluorescent ballasts, in addition to
Lutron Tu-Wire.
Diva dimmers, switches, and fan controls Diva dimmers, switches, and fan controls
24
25
lutron.com/specificationguide | 1.800.523.9466 | | 1.800.523.9466 | lutron.com/specificationguide
DESIGNER
WALLPLATE
OPENING
DESIGNER
WALLPLATE
OPENING
Volume 1 P/N 367-1746 REV G Volume 1 P/N 367-1746 REV G