Specification Sheet

Relay modules
•
General purpose switch
controls lighting, fan, and
motor loads
•
Uses patented Softswitch
technology to extend relay
life to average 1,000,000
cycles
•
Available with dry
contact closure output
for integration with third-
party equipment; provides
occupancy status
Switching module
Vive PowPak relay modules
5 A (1/6 HP – 120 V, RMJS-5R-DV-B
1/3 HP – 277 V) 120/277 V
5 A (1/6 HP – 120 V, RMJS-5RCCO1-DV-B
1/3 HP – 277 V) 120/277 V
with contact closure output
16 A (1/2 HP – 120 V, RMJS-16R-DV-B
1 1/2 HP – 277 V) 120/277 V
16 A (1/2 HP – 120 V, RMJS-16RCCO1-DV-B
1 1/2 HP – 277 V) 120/277 V
with contact closure output
20 A (1 HP – 120 V, RMJS-20R-DV-B
2 HP – 277 V) 120/277 V
20 A (1 HP – 120 V, RMJS-20RCCO1DVB
2 HP – 277 V) 120/277 V
with contact closure output
Vive PowPak contact closure module
1 contact closure output RMJS-CCO1-24-B
24 V AC/DC
EcoSystem/DALI
• Compatible with any Lutron
EcoSystem LED driver or
ballast for high-performance
dimming and control
•
Multiple drivers/ballasts
connected to control module
will always work together as a
single zone
R
EcoSystem LED/driver fluorescent ballast
fixture dimming module
Vive PowPak single zone
32 drivers/ballasts RMJS-ECO32-SZ
120/277V
/
lutron.com/specificationguide | 1.800.523.9466 | | 1.800.523.9466 | lutron.com/specificationguide
100
101
COMMERCIAL
WIRELESS
COMMERCIAL
WIRELESS
100
101
lutron.com/specificationguide | 1.800.523.9466 | | 1.800.523.9466 | lutron.com/specificationguide
Volume 1 P/N 367-1746 REV G Volume 1 P/N 367-1746 REV G
* Vive PowPak 20 A relay module is not compatible with the
Radio Powr Savr wireless daylight sensor.
Product family features
•
Uses Lutron Clear Connect radio frequency
(RF) technology, which provides reliable RF
communication with up to 10 Pico wireless
remotes, 10 Radio Powr Savr occupancy/vacancy
sensors, 1 Radio Powr Savr wireless daylight
sensor*, and 1 Vive wireless hub
•
Compatible with Vive hub, which enables a simple
setup process using the Vive app or a standard
web browser; also permits control and monitoring
of all Vive devices
•
Mounts through a 1/2" NPT trade size knock-out
to a junction box or to a fixture
•
Can also be mounted inside of a standard 4" x 4"
junction box
•
RF range of 60 ft (18 m) line-of-sight, 30 ft (9 m)
through walls and floors to other compatible
RF devices
•
Communicates at 434 MHz frequency
Direct load type compatibility
PowPak dimming modules
LED lighting
Fluorescent
PowPak relay modules
Switched lighting/fan/motor
Receptacles
PowPak contact closure module
R
Low-voltage resistive
Shown actual size: Vive PowPak dimming
module for 0-10 V control
2.82 in (72 mm)
1.25 in
(32 mm)
depth
3.94 in (100 mm)
0 –10 V LED/fluorescent fixture
dimmingmodule
Vive PowPak dimming module for
0 –10 V control
60 mA max control current RMJS-8T-DV-B
120/277 V 8A
Compatible with any IEC 60929 AnnexE
compliant driver or ballast.
Dimming module for
0 –10 Vcontrol
• 0 –10 V analog control is widely
used in the fixtureindustry
• Automatically adjusts to both
sink and source LED and
fluorescent fixtures
Shown actual size: PowPak fixture
occupancy/daylight sensor in White (WH)
1.5 in (38 mm) diameter
0.65 in
(17 mm)
profile
Vive PowPak modules Vive PowPak modules