Specification Sheet

ManualsBrandsLutron ManualsLightingClaro Three Gang Designer Wall Plate

Dimmer models/load interface compatibility

Technical notes:

•

Lighting load interfaces must be matched to load type

and voltage

•

Interfaces typically require additional power feeds

•

Power feed to dimmer may differ from lighting

load/interface voltage

•

For wiring information, visit lutron.com/support

Use only dimmer model numbers listed.

* Visit lutron.com/ledtool for a recommended list

of dimmable LED (screw-base) bulbs.

** Dual 120/277 V model given,120 V-only

versions are also available.

Dimmable LED (screw-base)*, incandescent, and magnetic and electronic low-voltage

(120/277 V)

3-wire LED drivers or

ﬂuorescent ballasts

(120/277 V)

0-10 V DC LED

or ballast ﬁxtures

(120/277 V)

Tu-Wire ﬂuorescent

ballasts (120 V)

Switched lighting

(120/277 V)

WBX

TVI

PA SW

Wallbox Phase Adaptive Power Module

Mounts to a 2-gang backbox (W: 6.30 in x H: 5.10 in)

Requires 3-wire ﬂuorescent dimming input

(see below for model numbers)

Phase Adaptive

Power Module**

Mounts to a 2-gang backbox

(W: 6.30 in x H: 5.10 in)

Fluorescent Power Module

Mounts to a 2-gang back-

box (W: 6.30 in x H: 5.10 in)

0-10 V Interface

Surface-mount only

(W: 6.10 in x H: 12.50 in x

D: 3.30 in)

Phase Adaptive Power

Module; Mounts to a

2-gang backbox

(W: 6.30 in x H: 5.10 in)

Switching Power Module

Mounts to a 2-gang back-

box (W: 6.30 in x H: 5.10 in)

120 V control

PHPM-WBX-DV-WH**

277 V control

PHPM-WBX-277/DV

120 V control

PHPM-PA-DV-WH

120 V control

PHPM-3F-DV-WH**

120 V control

GRX-TVI

120 V control

PHPM-PA-DV-WH**

120 V control

PHPM-SW-DV-WH**

Dimmer

Family

Single-

pole

3-way or

multi-location

Single-pole

3-way or

multi-location

Single-pole

3-way or

multi-location

Single-

pole

3-way or

multi-location

Single-

pole

3-way or

multi-location

Single-

pole

3-way or

multi-location

Single-

pole

3-way or

multi-location

Ariadni

– AYF-103P- – AYF-103P-277- – – – AYF-103P- – AYF-103P- – AYF-103P- – –

Caséta Wireless

– – – – – PD-10NXD- – PD-10NXD- – PD-10NXD- – PD-10NXD- – PD-6ANS-

Diva Gloss

– DVF-103P- – DVF-103P-277- – – – DVF-103P- – DVF-103P- – DVF-103P- – –

Diva

Satin Colors

–

DVSCF-

103P-

–

DVSCF-103P-

277-

– – – DVSCF-103P- – DVSCF-103P- – DVSCF-103P- – –

GRAFIK T

– – – – –

GT-250M-

GTJ-250M-

–

GT-250M-

GTJ-250M-

–

GT-250M-

GTJ-250M-

–

GT-250M-

GTJ-250M-

–

GT-5ANSM-

GTJ-5ANSM-

Maestro Gloss

– – – – – MA-PRO- – MA-PRO- – MA-PRO- – MA-PRO- – MA-S8AM-

Maestro

Satin Colors

– – – – – MA-PRO- – MA-PRO- – MA-PRO- – MA-PRO- – MSC-S8AM-

Nova T*

NTF-10- NTF-103P- NTF-10-277- NTF-103P-277- – – NTF-10- NTF-103P- NTF-10- NTF-103P- NTF-10- NTF-103P- – –

Skylark

SF-10P- SF-103P- SF-12P-277- SF-103P-277-3- – – SF-10P- SF-103P- SF-10P- SF-103P- SF-10P- SF-103P- – –

Vive Maestro

Wireless

–

MRF2S-

6ELV120-

– – –

MRF2S-

6ND-120-

–

MRF2S-

6ELV120-

–

MRF2S-

6ELV120-

– – –

MRF2S-

6ANS-

Technical notes:

•

Lighting load interfaces must be matched to load type

and voltage

•

Interfaces typically require additional power feeds

•

Power feed to dimmer may differ from lighting

load/interface voltage

•

For wiring information, visit lutron.com/support

Use only dimmer model numbers listed.

** Dual 120/277 V model given,120 V-only

versions are also available.

lutron.com/speciﬁcationguide | 1.800.523.9466 |

Volume 1 P/N 367-1746 REV G Volume 1 P/N 367-1746 REV G

| 1.800.523.9466 | lutron.com/speciﬁcationguide

LUTRONLUTRON

Lighting load interfacesLighting load interfaces