Specification Sheet

Dimmer model numbers
Dimmer, fan control and switch
model numbers
Incandescent/halogen dimmers
Preset dimmers with locator light
Single-pole LX-600PL-CC
1
120 V 600 W
Single-pole LX-10PL-CC
1
120 V 1000 W
3-way LX-603PL-CC
1
120 V 600 W
3-way LX-103PL-CC
1
120 V 1000 W
Magnetic low-voltage dimmers
Preset dimmers with locator light
Single-pole LXLV-600PL-CC
1
120 V 600 VA (450 W)
Single-pole LXLV-10PL-CC
1
120 V 1000 VA (800 W)
3-way LXLV-603PL-CC
1
120 V 600 VA (450 W)
3-way LXLV-103PL-CC
1
120 V 1000 VA (800 W)
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
Electronic low-voltage dimmers*
Preset dimmers with locator light
Single-pole LXELV-600PL-CC
1
120 V 600 W
3-way LXELV-603PL-CC
1
120 V 600 W
Certain LED drivers are dimmable using an
ELV dimmer, for more information, visit
www.lutron.com/LED.
3-wire fluorescent dimmers*
Preset dimmers with locator light
3-way/single-pole LXF-103PL-CC
1
120 V 8 A
3-way/single-pole LXF-103PL-277-CC
1
277 V 6 A
For use with Hi-lume
®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
Also compatible with Hi-lume
® LED driver.
No derating required if ganged.
Adjustable low-end trim.
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
Preset dimmers with locator light
3-way/single-pole LXF-103PL-CC
1
120 V 8 A
3-way/single-pole LXF-103PL-277-CC
1
277 V 6 A
For use with Hi-lume LED driver only.
No derating required if ganged.
Adjustable low-end trim.
Fan control
Fan controls—quiet 3-speed
3-way/single-pole ceiling fan LXFSQ-F-CC
1
120 V 1.5 A
No derating required if ganged.
Switches
Switches with locator light
Single-pole non-dimmed lighting LX-1PSL-CC
1
120 V 600 W/VA (5 A) or 1HP motor load
3-way non-dimmed lighting LX-3PSL-CC
1
120 V 600 W/VA (5 A) or 1 HP motor load—
1000 W/VA (8 A) when used with 1000 W dimmer
4-way non-dimmed lighting LX-4PSL-CC
1
120 V 600 W/VA (5 A) or 1 HP motor load—
1000 W/VA (8 A) when used with 1000 W dimmer
No derating required if ganged.
Lyneo® Lx dimmers, switches and fan controls
Designer
wallplate opening
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
CC
1
: Gloss and Satin color codes, see pg. 95
(Wallplates not included, order separately,
see pg. 160)
98
www.lutron.com | 1.800.523.9466 |