Specification Sheet

11 www.lutron.com | 1.800.523.9466 |
Radio Powr SavrTM
wireless sensors
†
Maestro® wallbox
occupancy/vacancy
sensors
Occupancy/
vacancy
sensor pg. 144
Sensor/
dimmer
pg. 140
Sensor/
switch
pg. 140
Daylight
sensor
pg. 146
4. Additional selection
considerations
Four steps to selecting your control | Step 4
†
Radio Powr Savr now works with Maestro
Wireless
® dimmers or switches as indicated
*
LOS series available, see pg. 140
I I
I I
I I
I I
I I
I I
Ganging and derating
Ganging is the mounting of two or more
dimmers or accessory devices side-by-side
under a multi-gang wallplate. When you
combine two or more dimmers, you may
need to derate the power rating and remove
a portion of the dimmer beneath the wallplate.
See pg. 170 for details.
Lighting load interfaces
To dim larger loads on a single dimmer, you can
use a power interface. Interfaces require 3-wire
dimmers and may require additional power feeds
from distribution panels. See pg. 174 for details.
Screw-based Compact Fluorescent
Lighting (CFL)
Screw-based CFL lamps offer energy efficiency
and long life, but typically many of them do
not dim.
CFL loads are quantified in Watts (W).
Dimmable to about 30% perceived light with
similar energy savings.
Lutron offers dimmers designed specifically for
Philips Energy Saver DIMMABLE CFL lamps, see
Diva (pg. 86) and Skylark (pg. 104) families for
available models.
To learn more about how Lutron products
can save you energy, visit our web site,
www.lutron.com/energy.