Specification Sheet

Shown actual size: Maestro dimmer with
occupancy/vacancy sensor and 1-gang
Claro
® wallplate in White (WH).
2.94 in (75 mm)
4.69 in (119 mm)
Sensors | Maestro® wallbox occupancy/vacancy sensors
Also available
LOS wall
occupancy sensors
Product family features
•
The LOS-S series of sensors offer a direct and quick replacement of wall
switches for standalone line voltage switching of small spaces
•
Lutron offers “M” models (LOS-SIR-M-WH and LOS-SIR-M-IV), which
are manual-on and auto-off occupancy sensors. “M” models meet
California Title 24 Section 119 (j) energy code requirements.
•
No power pack required
•
LED test indicator
•
120/277 VAC dual voltage operation
•
For additional information, see pg. 143
Product family features
•
Available as a dimmer or switch with sensor
•
Will turn lights on as you enter the space or
off after the room is vacated
•
Occupancy/vacancy (auto-on/auto-off or
manual-on/auto-off) or vacancy only (manual-on/
auto-off) versions available
•
Vacancy models meet California Title 24
Section 119 (j) requirements
•
Sensor must have unobstructed view and
line-of-sight to room occupants
•
Passive infrared motion detection with dependable
Lutron XCT
TM technology for fine motion detection
•
180˚ sensor field-of-view
•
Up to 30 ft x 30 ft major motion and 20 ft x 20 ft
minor motion coverage
•
Mechanical air-gap to disconnect load power
•
Coordinating Claro®, Satin Colors® and Stainless
Steel wallplates only available separately
•
Engraving and custom colors available, for
additional information, see pg. 155
Control types
Single-pole (one location)
Multi-location (up to ten locations)
Direct load type compatibility
Incandescent/halogen lighting
.30 in
(7.6 mm)
profile
140
www.lutron.com | 1.800.523.9466 |