Specification Sheet

Sensors | Maestro® wallbox occupancy/vacancy sensors
Dimmers with occupancy/vacancy sensor
•
Adjustable timeout—
1, 3, 5, 15 or 30 minutes
•
Occupancy/vacancy version
can be easily programmed
to work as vacancy
(manual-on) sensor
•
Optional off warning dims the
lights by 50%, 30 seconds
before the light turns off
•
High-low sensitivity adjustment
•
Standard Maestro dimmer
features: locked preset,
fade-to-on and fade-to-off
•
Works with up to nine
companion dimmers
(MA-R-)
Dimmer model numbers
Incandescent/halogen**
Digital fade dimmer with
occupancy/vacancy sensor
Multi-location/single-pole MS-OP600M-CC
1
120 V 600 W
Digital fade dimmer with vacancy sensor
Multi-location/single-pole MS-VP600M-CC
1
120 V 600 W
Switch model numbers
Switches*
Switch with occupancy/vacancy sensor
Multi-location/single-pole MS-OPS5AM-CC
1
120 V 5 A lighting
Switch with vacancy sensor
Multi-location/single-pole MS-VPS5AM-CC
1
120 V 5 A lighting
Designed for use with permanently installed
lighting loads.
Switches with occupancy/vacancy sensor
•
Adjustable timeout—
1, 5, 15 or 30 minutes
•
Occupancy/vacancy version
can be easily programmed
to work as vacancy
(manual-on) sensor
•
High-low sensitivity adjustment
•
5 A switch controls:
incandescent, halogen,
MLV, ELV and non-dim
fluorescent (neutral required)
•
Works with up to nine
companion switches
(MA-AS-)
Maestro dimmers and switches with sensors
All models must be derated if ganged unless
otherwise noted, see pg. 170.
For more information on occupancy/vacancy
sensors, visit www.lutron.com/occsensors.
*Requires neutral wire connection.
**Minimum load is 40 W/VA.
CC
1
: Gloss and Satin color codes, see pg. 141
(Wallplates not included, order
separately, see pg. 160)
142
www.lutron.com | 1.800.523.9466 |