Specification Sheet

Appendix | Wiring diagrams
Wiring diagram #32
Multi-location wiring of 3-wire fluorescent control
Dimmer
CompanionCompanion
Up to Nine Total Accessories
To Additional Ballasts
Black
White
Orange
Black
White
OrangeOrange
Neutral
Accessory: Accessory Dimmer, Auxiliary Tapswitch
Red** Red**
Blue
†
Black*
White
††
Black* Black*
Hot
120/277 VAC
60
Hz Feed
Green Green Green
Red**
Blue
†
Blue
†
Control
Load Side
Dimming Ballast
Dimming Ballast
*or Copper/Black screw terminal
* *or Brass/Gold screw terminal
†
or Blue screw terminal
††
or Silver screw terminal
Wiring diagram #38
Single-pole wiring of 0-10 V fluorescent control and a Power Pack (PP-277H shown)
Class 2 Wiring
#20 AWG
277 VAC
60 Hz Feed
Black
RedRed
Blue
Blue
Violet (+)
Gray (-)
Black (Cap off)
Red
Black (120
VAC) *
White
Red Black
Hot
White
Neutral
0-10
V
Wall Control
Lutron
PP-277
H
Black
White
Violet (+)
Gray (-)
Black
White
Violet (+)
Gray (-)
0-10
V
0-10
V
0-10
V Control Signal Wires –
DO NOT CONNECT TO LINE VOLTAGE.
Lutron is not liable for damage due to miswiring.
To Additional Ballasts
(60 Maximum)
Dimming Ballast
Dimming Ballast
* Wiring is similar for PP-120H, PP-230H, and PP-347H
For PP-20, contact Lutron Technical Support at 1.800.523.9466
192
www.lutron.com | 1.800.523.9466 |