Specification Sheet

Appendix | Wiring diagrams
Wiring diagram #39
Power interfaces with 3-wire fluorescent control wiring:
Incandescent/halogen/magnetic low-voltage/electronic low-voltage
Lighting
Loads
Rear View of PHPM-WBX-DV-WH
H/L
N
DH
Control Neutral
Zone In
120/277 VAC
60
Hz Feed
Neutral
Hot
Orange
Red
Green
Hot Hot
120 VAC
60
Hz Feed
From Distribution
Panel
Wire single-pole,
3-way, or
multi-location
3-wire uorescent
dimmer as normal
except run the
control wire to the
zone in terminal.
For neon/cold cathode loads, the B-wire dimmers low-end trim needs to be adjusted. Select a 3-wire dimmer that has an adjustable low-end trim.
*For Tu-Wire® loads replace PHPM-WBX-DV with a PHPM-PA-DW and wire the same
Neutral
Neutral
193
www.lutron.com | 1.800.523.9466 |
Wiring diagram #40
Switching power interface:
Incandescent/halogen, MLV, ELV, Magnetic and Electronic fluorescent ballasts, HID
Lighting
Loads
Rear View of PHPM-SW-DV-WH
H/L
N
SH
Control Neutral
Zone In
120/277 VAC
60 Hz Feed
Neutral
Hot
Black
Green
Neutral
Hot Hot
120 VAC
60
Hz Feed
From Distribution
Panel
Neutral
Wire single-pole,
3-way, or
multi-location
switch as normal
except run the
control wire to the
zone in terminal.
*Also compatible with motor loads.