Specification Sheet

Dimmer model numbers
Switch and companion control
model numbers
Incandescent/halogen and/or
Magnetic low-voltage dimmers
Single-touch dimmer
Single-pole VT-600-D
1
-AA
2
120 V 600 W/VA
Multi-location/single-pole VT-600M-D
1
-AA
2
120 V 600 W/VA
Multi-location/single-pole VT-1000M-D
1
-AA
2
120 V 1000 W/VA
The stated W (Watt) rating is the maximum
incandescent lamp load. Ratings for MLV loads
represent the maximum of the total lamp wattage
plus MLV transformer loss (typically 20%).
Electronic low-voltage dimmers*
Single-touch dimmer
Multi-location/single-pole VTELV-600M-D
1
-AA
2
120 V 600 W
Only certain LED drivers are dimmable using an
ELV dimmer, for more information visit
www.lutron.com/LED.
3-wire fluorescent dimmers*
Single-touch dimmer
Multi-location/single-pole VTF-6AM-D
1
-AA
2
120/277 V 6 A
For use with Hi-lume
®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
Adjustable high-end and low-end trim.
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
Single-touch dimmer
Multi-location/single-pole VTF-6AM-D
1
-AA
2
120/277 V 6 A
Adjustable high-end and low-end trim.
Exclusively compatible with Hi-lume LED driver.
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
Switches*
Single-touch electronic switch
Multi-location/single-pole VT-S6AM-D
1
-AA
2
120 V 6 A light or 3 A fan
Multi-location/single-pole VT-S6AMUNV-D
1
-AA
2
120 V 6 A light or 3 A fan
277 V 6 A light
Rated for: incandescent/halogen, magnetic
low-voltage, electronic low-voltage, non-dim
fluorescent ballasts, general purpose fans and
most non-dim LED drivers.
For multi-location switching, use with Vierti
multi-location companion switches
VT-AS-D
1
-AA
2
.
Not for use with mechanical 3-way or
4-way switches.
Companion controls
Single-touch companion dimmer
120/277 V VT-AD-D
1
-AA
2
No derating required if ganged.
Single-touch companion switch
120 V VT-AS-D
1
-AA
2
No derating required if ganged.
For more information on ballasts, visit
www.lutron.com/ballasts.
All models must be derated if ganged, unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
Vierti® single-touch dimmers and switches
New Architectural
wallplate opening
D
1
: LED bar color codes, see pg. 15
AA
2
: Architectural matte color codes, see pg. 15
(1-gang wallplate included)
18
www.lutron.com | 1.800.523.9466 |