Specification Sheet

Switches
Tapswitch
Multi-location/single-pole VETS-1000-AA
2
120 V 1000 W/VA
Tapswitch with locator light*
Multi-location/single-pole VETS-1000-SL-AA
2
120 V 1000 W/VA
Rated for: incandescent/halogen, magnetic
low-voltage, fluorescent switching with
magnetic ballasts.
Tapswitch*
Multi-location/single-pole VETN-1000-AA
2
120 V 1000 W/VA
Rated for: electronic low-voltage, fluorescent
switching with electronic ballasts and most
non-dim LED drivers.
Auxiliary tapswitches
Auxiliary tapswitch
120 V
VETS-R -AA
2
For multi-location switching, use up to
nine auxiliary tapswitches, except with
VETS-1000-SL- model.
Not for use with mechanical 3-way or
4-way switches.
Auxiliary tapswitch with status light
120 V VETS-A-SL-AA
2
For multi-location switching, use up to four
VETS-A-SL- with one VETS-1000-SL- model.
Not for use with VETS-R- or mechanical
3-way or 4-way switches.
VETS-R- and VETS-A-SL auxiliary
electronic tapswitches do not require
derating when ganged.
Dimmer model numbers Switch and auxiliary tapswitch model numbers
Incandescent/halogen and/or
Magnetic low-voltage dimmers
Preset dimmers
Multi-location/single-pole V-600-AA
2
120 V 600 W/VA
Multi-location/single-pole V-1000-AA
2
120 V 1000 W/VA
The stated W (Watt) rating is the maximum
incandescent lamp load. Ratings for MLV loads
represent the maximum of the total lamp wattage
plus MLV transformer loss (typically 20%).
3-wire fluorescent dimmer*
Preset dimmer
Multi-location/single-pole VF-10 -AA
2
120 V 8 A
For use with Hi-lume
®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
No derating required if ganged.
Adjustable low-end and high-end trim.
Hi-lume® LED drivers:
3-wire fluorescent dimmer*
Preset dimmer
Multi-location/single-pole VF-10-AA
2
120 V 8 A
To control lights from multiple-locations, use
Vareo
® auxiliary electronic tapswitches,
VETS-R-.
Not for use with mechanical 3-way
or 4-way switches.
Adjustable high-end and low-end trim.
For more information on Lutron ballasts,
visit www.lutron.com/ballasts.
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
All models must be derated in standard
ganging unless otherwise noted, see pg. 170.
*Requires neutral wire connection.
Vareo® dimmers and switches
Architectural
wallplate opening
AA
2
: Architectural matte color codes, see pg. 21
(1-gang wallplate included)
24
www.lutron.com | 1.800.523.9466 |