Specification Sheet

Product family features
•
Uses Lutron ’ s Clear ConnectTM Radio
Frequency (RF) Technology which provides
reliable RF communication
•
Typical range of PicoTM wireless control is 100 ft
line-of-sight, 30 ft through walls and floors
•
True multi-location dimming from every location
•
Tap on to favorite level; tap off; tap twice for full on
•
Touch rocker to adjust light level
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable
light levels, despite power line frequency and
voltage variations
•
Combine devices to create a system of up to
ten wireless devices, dimmers, switches, sensors
and/or wireless controllers
•
Mechanical air-gap to disconnect load power
•
100% factory tested
•
Battery included with wireless controllers
•
Coordinating Claro®, Satin Colors® and Stainless Steel
wallplates only available separately
•
Custom engraving available for wallplates, see pg. 155
Control types
Single-pole (one location)
Multi-location dimming (up to ten locations)
Wireless multi-location dimming
(up to ten locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
Fluorescent lighting
LED lighting
Load type requiring load interface
Electronic low-voltage lighting
Lighting load interfaces may be applicable
for some additional load type, voltage and
capacity combinations.
For additional information, see pg. 174.
Shown actual size: Maestro Wireless dimmer
and 1-gang Claro wallplate in White (WH), with
a Pico wireless control in White/Gray (WG).
Shown actual size: Pico wireless control in White/
Gray (WG), W: 1.25 in (31.75 mm) x H: 2.625 in
(66.68 mm) x D: .33 in (8 mm).
.30 in
(7.6 mm)
profile
2.94 in (75 mm)
4.69 in (119 mm)
Maestro Wireless® dimmers, switches and sensors
Designer
wallplate opening
68
www.lutron.com | 1.800.523.9466 |