Specification Sheet

Product family features
•
True multi-location dimming from every location
•
Use the IR (infrared) remote control to adjust lights
from anywhere in the room up to 30 ft line-of-sight
•
4-scene presets plus full on/off and raise/lower
•
Tap dimmer on to favorite level; tap off; tap dimmer
twice for full on
•
Touch rocker to adjust light level
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable
light levels, despite power line frequency and
voltage variations
•
IR (infrared) remote control convenience
•
Install with standard wiring—replace existing switches
or dimmers
•
Mechanical air-gap to disconnect load power
•
100% factory tested
•
Coordinating Claro® and Stainless Steel wallplates
only available separately
•
Custom engraving available for wallplates, see pg. 155
Control types
Single-pole (one location)
Multi-location dimming from every
location (up to ten locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Load type requiring load interface
Lighting load interfaces may be
applicable for some load type, voltage
and capacity combinations.
For additional information, see pg. 174.
Shown actual size: Spacer System
master control and 1-gang Claro wallplate
in White (WH).
.30 in
(7.6 mm)
profile
2.94 in (75 mm)
4.69 in (119 mm)
Spacer System® dimmers and switches
Designer
wallplate opening
76
www.lutron.com | 1.800.523.9466 |