Specification Sheet

Master controls Dimmers and switches
Wall mounted master controls
•
Controls up to four dimmers of
all load types
•
4-preset scenes, plus full on and
all off
•
Rocker for raise/lower
master override
•
IR receiver for remote control
•
When using 120 V and 277 V
products in the same backbox,
use 600 V rated cable. Follow
NEC
®, see application note
#133 (U.S. requirements for
mixing 120 V and 277 V products
in the same Wallbox) visit
www.lutron.com/applicationnotes
Wall mounted master controls with IR blasters
•
Same features as above
•
Controls up to four dimmers
per blaster
•
Requires two travel wires
between master control and
IR blasters
Dimmers with IR receiver
•
Tap on to favorite level; tap off
•
Touch rocker to adjust light level
•
Tap twice for full on
•
Press, hold and release for
delayed fade-to-off
•
Provides true dimming from each
location with companion dimmers
Digital switches
•
For multi-location Spacer System
multi-location switch with Spacer
System companion switches
•
When using 120 V and 277 V
products in the same backbox,
use 600 V rated cable. Follow
NEC
®, see application note
#133 (U.S. requirements for
mixing 120 V and 277 V products
in the same Wallbox) visit
www.lutron.com/applicationnotes
Plug-in lamp dimmers with integral IR receiver
•
For use with table and floor
lamps only
•
Requires no wiring or tools
•
Only available in
Royal Plum (RP)
Spacer System® dimmers and switches
Designer
wallplate opening
78
www.lutron.com | 1.800.523.9466 |