Specification Sheet

Dimmer model numbers
Magnetic low-voltage dimmers**
Dimmers with IR receiver
Single-location SPSLV-600-CC
3
120 V 600 VA (450 W)
Single-location SPSLV-1000-CC
3
120 V 1000 VA (800 W)
Multi-location SPSLV-600M-CC
3
120 V 600 VA (450 W)
Multi-location SPSLV-1000M-CC
3
120 V 1000 VA (800 W)
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
Electronic low-voltage dimmers*
Dimmers with IR receiver
Single-location SPSELV-600-CC
3
120 V 600 W
Multi-location SPSELV-600M-CC
3
120 V 600 W
Only certain LED drivers are dimmable using
an ELV dimmer, for more information visit
www.lutron.com/LED.
3-wire fluorescent dimmers*
Dimmers with IR receivers
Single-location SPSF-6A-CC
3
120 V 6 A
20 ballasts
Multi-location SPSF-6AM-CC
3
120 V 6 A
20 ballasts
Single-location SPSF-6A-277-CC
3
277 V 6 A
20 ballasts
Multi-location SPSF-6AM-277-CC
3
277 V 6 A
20 ballasts
For use with Hi-lume
®, Hi-lume® Compact SE,
Hi-lume
® 3D, Eco-10®, EcoSystem® ballasts.
Also compatible with Hi-lume
® LED driver.
Fixed low-end trim (non-adjustable).
Tu-Wire® fluorescent dimmer*
Dimmer with IR receiver
Single-location SPSFTU-5A-CC
3
120 V 5 A
Also compatible with Advance Mark X
ballasts, for further information visit
www.lutron.com/advance.
For information on use with Universal and
OSRAM ballasts, contact Technical Support
at 1.800.523.9466.
For more information on ballasts, visit
www.lutron.com/ballasts.
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
**Minimum load 60 W/VA.
Spacer System® dimmers and switches
Designer
wallplate opening
CC
3
: Gloss color codes, see pg. 77
(Wallplates not included, order separately,
see pg. 160)
82
www.lutron.com | 1.800.523.9466 |