Cut Sheet

ManualsBrandsLutron ManualsDecora Incandescent DimmersSlide Dimmer, Decora, 600W, Single-Pole, Diva, White

The designer dimmer that

matches your paddle switches.

PRODUCT FAMILY FEATURES

• Large paddle switch with a captive linear-slide dimmer for a standard

designer wallplate opening

• Full family of products for most lighting sources

• Dimmers feature built-in soft-glow nightlight

• Uses standard single-pole and 3-way wiring for easy installation in any

home

• For more Diva choices, see the new Diva Satin Colors product line

DIMENSIONS

Front Proﬁle

SPECIFICATION SUBMITTAL

CONTROLS AND ACCESSORIES

Preset Fan-Speed Switches

Dimmers Controls

Have Questions? Call the Lutron Hotline 800-523-9466

To order—Call Lutron Customer Service 610-282-3800

JOB NAME AREA CONTROLLED

LOCATION JOB NUMBER

TITLE PAGE NO.

SPECIFICATION SERIES

STANDARD FEATURES

• Square Law Dimming • RFI suppression

• Power-failure memory • Captive linear slider

• Electrostatic discharge tested • Precise color matching

• Mechanical air-gap switch to disconnect load power

Lutron controls are rated at 120VAC, 60Hz unless otherwise noted.

Controls

www.lutron.com/diva

Soft glow

nightlight

Select light

level with

slider

Switch on

to selected

light

level/off

Preset

Dimmer

Preset Fan-Speed

Controls

1.31"

(33mm)

2.75"

(70mm)

2.94"

(75mm)

4.69"

(119mm)

0.30" (7.6mm)

some models

up to 1.44" (37mm)

Select fan

speed with

slider

Switch on

to selected

fan

speed/off

Cable TV

Jack

Single

Telephone Jack

15A

Receptacle

15A

GFCI Receptacle

2-gang to 6-gang wallplates

Telephone/Cable TV Jacks

Standard Multigang Wallplates

Receptacles

Ports

6-Port

Frame

Summary of content (11 pages)

PAGE 1
S P E C I F I C AT I O N S U B M I T TA L Controls www.lutron.com/diva CONTROLS AND ACCESSORIES The designer dimmer that matches your paddle switches.
PAGE 2
Controls Description Maximum Capacity 1 Model # Description DIMMERS Maximum Capacity 1 Model # HI-POWER 2•4•6 DIMMING MODULES TM Incandescent Preset Dimmers with Nightlight Single pole 600W Single pole 1000W 3-way 600W 3-way 1000W To increase load capacity up to 30,000W/VA in most popular sources, use one DV-600P- or DV-603P- and add up to five dimming modules. Cannot be used with 0-10VDC ballast.
PAGE 3
Controls Description Rating Model # ACCESSORIES Field Customizable Multi-Port Frame 6-Port Frame Shipped with 6 blanks CA-6PFShown with blanks Product above: For use with Lutron connectors shown below. Also compatible with Hubble XceleratorTM and snap-fit connectors. Connectors For use with 6-port frame (CA-6PF-). Each connector fills one port.
PAGE 4
Controls Description DERATING/MAXIMUM CAPACITY Model # STANDARD WALLPLATES 1-Gang 2.94”W (75mm) x 4.69”H (119mm) x 0.30”D (7.6mm) CW-1- No side sections removed (Full Capacity) 2-Gang 4.75”W (121mm) x 4.69”H (119mm) x 0.30”D (7.6mm) CW-2- One side section removed (End Units) Two side sections removed (Middle Unit) 500W 800W 400W 650W 250W 200W 600VA (450W 2) 500VA (375W 2) 400VA (300W 2) 1000VA (800W 2) 800VA (650W 2) 650VA (500W 2) Incandescent Dimmers 600W 1000W 3-Gang 6.
PAGE 5
Controls WIRING DIAGRAMS Wiring Diagram 1 Single-Pole Wiring DV-600PDV-10PDVLV-600PDVLV-10PCA-1PSH- Dimmer/ Switch/Fan-Speed Control Black * Black or Red * Hot 120VAC 60Hz Green ** Wiring Diagram 4 3-Way Wiring Model # Control Load Side Hot Model # DVELV-303PCA-3PS- 3-Way Switch ** 3-Way Dimmer Red * Yellow * Lighting Load or Fan 120VAC 60Hz Neutral Green White Neutral Ground ** or Brass screw terminal ** or Green screw terminal Wire Connectors *** or Copper/Black *** screw terminal
PAGE 6
Controls WIRING DIAGRAMS Wiring Diagram 6 3-Way Wiring Model # Fan-Speed Control or 3-Way 3-Way Dimmer/Switch Switch Black ** Red * * ** Control Line Side Control Load Side Hot Hot Red *† 120VAC 60Hz ** 120VAC OR 60Hz *** Lighting Load or Fan * Red *† 3-Way Switch * Green *** * Fan-Speed Control or 3-Way Dimmer/Switch Red * Black ** Green *** Lighting Load or Fan *** Ground Wire Connectors *** or Brass/Gold *** screw terminal *** or Copper/Black *** screw terminal *** or Green screw ***
PAGE 7
Controls WIRING DIAGRAMS Wiring Diagram 8 Single-Pole Wiring of a 3-Way Control Blue Hot Dimmer Red Black Yellow or Orange 120VAC or 277VAC 60Hz Green Model # Ground White * Wire Connectors Dimming Ballast Orange or Brown ** Violet or Blue Typical 4-Wire Connection *** must use lamp ***disconnect sockets ***with magnetic ***dimming ballasts *** or Yellow/Blue or ***Yellow/Green when ***used with magnetic ***dimming ballasts Black White White * Dimming Ballast Orange or Brown ** Neutral DVF-
PAGE 8
Controls WIRING DIAGRAMS Wiring Diagram 12 Cable TV Jack Wiring Model # CA-CJH- 75-Ohm Cable 75-Ohm Cable Cable TV Jack Wiring Diagram 13 Telephone Jack Wiring Model # CA-PJH- Wire Jack Position Color White 1 2 Black 3 Red 4 Green 6-Conductor Yellow Telephone Jack* 5 6 Blue * accepts most 4-conductor jacks Wiring Diagram 14 Receptacle Wiring Model # CAR-15H- Receptacle (15A Shown) Black Hot White Brass Screws 120VAC 60Hz Nickel Plated Screws Green Screw Ground or Isolated Ground Building Gro
PAGE 9
Controls DIVA CONTROLS AND ACCESSORIES c. When on, the slider shall change the light level/fan speed. When off, the slider shall preselect the light level/fan speed that the control will turn on to. Paddle switch shall turn lights/fan on to the preselected level, or off. d. Paddle switch and slider shall be captured internal to the control. e. 3-Way controls shall be capable of multi-location on and mechanical air-gap off using standard 3-way and 4-way switches.
PAGE 10
Controls c. Dimmers shall have a resettable overload protection that automatically shuts off when dimmer capacity is exceeded. Protection methods that are non-resettable or require the device to be removed from the wall to reset shall not be acceptable. d. Dimmers shall be designed to withstand a short, per UL 1472 section 5.10, between load hot and either neutral or ground without damage to the dimmer. 4. Magnetic Low Voltage (MLV) Transformer Dimmers a.
PAGE 11
Controls PART 3 – EXECUTION 3.01 INSTALLATION A. Contractor shall furnish all devices (dimmers, accessories, & wallplate kits), labor and other services necessary for the proper installation of the devices as indicated on the drawings and specified herein. B. Contractor shall be responsible for derating dimmer capacity if side sections are removed. C. Contractor shall run separate neutral wires in 120/208 VAC installations. D.