Cut Sheet

ManualsBrandsLutron ManualsDecora Fluorescent DimmersFluorescent/LED Dimmer, Diva, Midnight

Table Of Contents

Copy of pdfformfields_file_11pages

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

Diva® 0–10 V Control Wallbox Controls

369147b 1 09.08.14

Diva® 0–10 V Controls

Controls for 0–10 V LED Drivers and

Fluorescent Ballasts.

Features

• Large paddle switch with a captive linear-slide

control for a standard designer-opening wallplate

• 0–10 V control link controls third party ﬁxtures

• DVSTV- wires as single pole or 3-way,

120–277 V~ switch

• DVTV- wires as a 24 V- switch. A Power Pack is

required to switch 120–277 V~ and 347 V~

• Patented switching technology extends

product lifetime

• Coordinating Claro

® and Satin Colors® wallplates

(available separately)

• High-end and low-end trim user adjustable for

optimal performance

Model Numbers

Select light

level with slider

Switch on

(to selected

light level)/off

Diva® 0–10 V Control

“XX” in the model number represents gloss ﬁnish color code. See Standard Colors and Finishes on Page 3.

“YY” in the model number represents satin ﬁnish color code. See Standard Colors and Finishes on Page 3.

For 3-way switching, use Claro® switches or other mechanical switches.

A Lutron® Power Pack (PP-DV or PP-347H) is required for switching ballasts and drivers. For Lutron® Power Pack Speciﬁcation please see Lutron® P/N 369544.

Model Number Operating Voltage Wiring

Load Switching

Capacity

0–10 V Sink

Capacity

DVSTV-XX

DVSCSTV-YY

120 –277 V~ Single pole / 3-way

8 A 50 mA

DVTV-XX

DVSCTV-YY

24 V- Single pole only

0 A

30 mA

Summary of content (8 pages)

PAGE 1
Diva® 0–10 V Control Wallbox Controls 369147b 1 09.08.14 Diva® 0–10 V Controls Controls for 0–10 V LED Drivers and Fluorescent Ballasts. Features • Large paddle switch with a captive linear-slide control for a standard designer-opening wallplate • 0–10 V control link controls third party ﬁxtures • DVSTV- wires as single pole or 3-way, 120–277 V~ switch • DVTV- wires as a 24 V- switch.
PAGE 2
Diva® 0–10 V Control Wallbox Controls 369147b 2 09.08.14 Speciﬁcations DVSTV- Models Regulatory Approvals • UL® Listed to US and Canadian safety requirements UL244A Power Operating Voltage 120–277 V~ 50/60 Hz Output Ratings • Switch rating of 8 A • 0–10 V control link for 50 mA maximum output, sink ONLY 0–10 V Control Link • 0–10 V control link is Class 1 • Controls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast / driver to limit the current draw to 2.
PAGE 3
Diva® 0–10 V Control Wallbox Controls 369147b 3 09.08.14 Speciﬁcations (continued) DVTV- Models Power Operating Voltage 24 V- 100 mA Output Ratings • Power Pack required for load switching. Power Pack is rated for 16 A • 30 mA maximum output, sink ONLY. 0–10 V Control Link • 0–10 V control is Class 2 • Controls up to 15 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast / driver to limit the current draw to 2.0 mA maximum) Performance Environment • For Indoor Use Only.
PAGE 4
Diva® 0–10 V Control Wallbox Controls 369147b 4 09.08.14 Dimensions 2.75 in (70 mm) 4.69 in (119 mm) 2.94 in (75 mm) 0.30 in (7.6 mm) 1.
PAGE 5
Diva® 0–10 V Control Wallbox Controls 369147b 5 09.08.
PAGE 6
Diva® 0–10 V Control Wallbox Controls 369147b 6 09.08.
PAGE 7
Diva® 0–10 V Control Wallbox Controls 369147b 7 09.08.14 Wiring Diagrams DVSTV- and DVSCSTV- (continued) 4-Way Wiring Line/Hot * ** 4-Way Switch † 3-Way Switch † * 120–277 V~ 50/60 Hz ** Red * ** Red / White * *** *** Ground Ground Black Switched Hot Violet (+) Gray (-) Violet (+) Gray (-) 0-10 V- Ballast/Driver Neutral Ground Switched Hot Violet (+) Gray (-) Neutral 0-10 V- Ballast/Driver Neutral Note: For 4-way wiring, control must be installed line side or load side.
PAGE 8
Diva® 0–10 V Control Wallbox Controls 369147b 8 09.08.