Use and Care Guide

Combination opening
2-gang (1 traditional, FG-2-TD-CC
3
1 designer opening)
Stainless Steel* FW-2-TD-SS
W: 4.67 in (119 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
Controls must have heat-sink fins broken for
multi-gang installations. Removing this metal
reduces the amount of heat that the control can
dissipate, thus reducing the wattage capacity of
the control. Please derate dimmers and switches
as required.
Multi-gang dimmer installations may require
derating, see pg. 170.
Rotate the wallplate for
small/large or large/small
opening applications.
1-gang FG-1-CC
3
Stainless Steel* FW-1-SS
W: 2.86 in (73 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
2-gang FG-2-CC
3
Stainless Steel* FW-2-SS
W: 4.67 in (119 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
3-gang FG-3-CC
3
Stainless Steel* FW-3-SS
W: 6.48 in (165 mm); H: 4.60 in (117 mm);
D: .23 in (5.8 mm)
Wallplates for Abella
®, Ceana®, Ariadni®,
Glyder
® and Rotary
Wallplates and accessories | Traditional | Fassada®
CC
3
: Gloss color codes, see pg. 167
Controls must have heat-sink fins broken for
multi-gang installations.
Multi-gang dimmer installations may require
derating, see pg. 170.
*Stainless Steel wallplates include black plastic
trim/adapter, visible from side. Match with
separate Black (BL) controls.
168
www.lutron.com | 1.800.523.9466 |