Cut Sheet
Operating Voltage
•
Universal input (120 V, 220/240 V and
277 V @ 50/60 Hz)
•
120 V only for 2-wire forward phase models
Control options
•
2-Wire forward phase control
(neutral required at control)*
•
EcoSystem digital link
•
3-Wire control
Lamp types and wattages
•
LED light engines, up to 40 W*
Shown above: Hi-lume A-Series LED driver, K-case
Model number is determined by load and control type. See pg. 63 for additional information.
Environment
•
Sound rating: Class A
•
Maximum case temperature is 65º C (149º F)
Mounting
•
K-case driver typically mounts via studs or tabs to
the outside of an LED fixture or on a junction box
•
“No studs” case option available
•
Any fixture type (downlight, cove light, sconce,
under-cabinet, etc.) will work with the Hi-lume
A-Series driver family, if the LED light engine
operates at either the constant current or
constant voltage levels specified
Wiring
•
EcoSystem digital link: Hi-lume A-Series LED
drivers require 4 wires plus Ground (E1, E2,
Constant Hot and Neutral); one 16-18 AWG solid
copper Class 1 or Class 2 wire per terminal
3-Wire: Requires 3 wires plus Ground (Dimmed
Hot, Switched Hot and Neutral); one 16-18 AWG
solid copper Class 1 wire per terminal
2-Wire forward phase: Requires 2 wires plus
Ground (Dimmed Hot and Neutral); one 16-18 AWG
solid copper Class 1 or Class 2 wire per terminal
•
The 16 AWG control wire must not exceed 900 ft,
and the 18 AWG must not exceed 550 ft; maximum
driver-to-LED light engine wire length is 10 ft (3 m)
•
Driver is grounded by a mounting screw to the
grounded fixture (or by terminal connection on
theK-case)
•
For control wiring diagrams, see pg. 74, and for
lamp wiring diagrams, see pg. 80.
Hi-lume A-Series is a high-performance LED driver that provides smooth, continuous 1% dimming for
virtually any LED fixture, whether it requires constant current or constant voltage. It is the world’s most
versatile LED driver family offered today due to the wide variety of compatible LED arrays, multiple form
factors and numerous control options.
Available case types
•
K-case
•
M-case
LED operating specifications
Constant Current
•
200 mA–2.1 A (in 10 mA steps)
•
5 W–40 W
•
Pulse width modulation (PWM) or constant current
reduction (CCR) dimming
Constant Voltage
•
10 V–40 V (in 0.5 V steps)
•
5 W–40 W
•
Pulse width modulation (PWM) dimming
Highest performance dimming to 1%
EcoSystem® digital link, 3-wire or 2-wire forward phase controlled
* For a complete list of compatible controls,
visit www.lutron.com/HilumeLED
Key standards
•
UL 8750 Recognized
•
FCC Part 15 compliant for commercial applications
at 120 V or 277 V and for residential applications
at 120 V
•
Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
• Models available to meet LED Driver requirements
for Energy Star 1.1
Features
•
Continuous, flicker-free dimming from 100% to 1%
•
Efficiency greater than 80% at 40 W
•
A rated lifetime of 50,000 hours
•
EcoSystem digital link allows for re-zoning without
rewiring, and can be wired as Class 1 or Class 2—
perfect for retrofit and new construction
•
Standard 3-wire line-voltage phase-control
technology for consistent dimming performance
and compatibility with all Lutron 3-wire
fluorescent dimmers
•
Constant current reduction (CCR) and pulse width
modulation (PWM) dimming available for constant
current light engines; constant voltage light engines
operate with pulse width modulation (PWM)
dimming only.
•
Sensors cannot connect directly to the driver
•
Line-voltage miswire protection
•
Instant light output at any level when turned on,
without flashing to full on
Specifications
•
Power factor greater than 0.90 at 40 W
•
Inrush current less than 2 A
For system compatibility information, see pg. 12.
Ballasts and drivers | Ballasts and drivers |
36 | Lutron Lutron | 37
Hi-lume® A-Series LED drivers Hi-lume A-Series LED drivers