Cut Sheet
Neutral
Dimmed Hot
Constant Hot
Neutral
Control (E2)
Control (E1)
EcoSystem® digital link
The EcoSystem digital link is a wired communication technology that
facilitates individual ballast addressing, connection of multiple control
devices and control of ballasts individually or in groups.
2-Wire forward phase
Forward phase control is a line-voltage phase control dimming method,
that operates on two wires: Dimmed Hot and Neutral.
Control type Features Ideal applications
EcoSystem digital link
•
Polarity insensitive, may be wired in
any topology
•
May be run with line-voltage wiring
(Class 1) or separately from the
line-voltage wiring (Class 2)
•
Allows for rezoning without rewiring
and all links are miswire protected
•
Projects requiring digital control for
individual fixture addressability
•
Upgrade from analog 0-10 V control
•
Multi-zone applications
•
Small, retrofit applications using
Lutron Energi TriPak
TM
Available for:
•
EcoSystem H-Series ballasts (UL and global models)
•
Hi-lume® 3D ballasts
•
EcoSystem ballasts
•
EcoSystem compact ballasts
•
Hi-lume A-Series LED drivers
•
EcoSystem LED drivers (CE)
Control type Features Ideal applications
Forward phase
•
Typically used for incandescent
and magnetic low-voltage (MLV)
lightsources
•
Easy to wire
•
Retrofit projects
•
Residential and commercial
system applications
•
Applications that have a neutral
wire in the backbox
Available for:
•
Hi-lume A-Series LED drivers
Neutral
Dimmed Hot
Switched Hot
3-Wire
3-Wire control is a line-voltage phase control dimming method that
communicates the dimming signal through a wire called Dimmed Hot.
Control type Features Ideal applications
3-Wire
•
All three wires are rated Class 1 and
run within the same conduit
•
Stable over long wire runs allowing for
maximum circuit loading
•
Dimmed Hot control wire allows for
more precise performance and less
electrical noise
•
Easy to wire
•
Fluorescent dimming applications
requiring precise control
Available for:
•
Hi-lume 3D ballasts
•
EcoSystem ballasts
•
EcoSystem compact ballasts
•
Hi-lume ballasts
•
Hi-lume A-Series LED drivers
Lutron ballast and driver control options
In addition to offering ballasts and drivers with different low-end dimming levels, Lutron offers a variety of
controloptions.
Neutral
Dimmed Hot
Tu-Wire®
Tu-Wire control is a line-voltage phase control dimming method that
uses two wires: Dimmed Hot, which carries the dimming signal;
andNeutral.
Control type Features Ideal applications
Tu-Wire
•
All wires are rated Class 1
•
Easy to wire, used to implement
dimming in existing fluorescentfixtures
•
Small-scale retrofit applications
Available for:
•
Tu-Wire ballasts
Lutron® |
10 | Lutron Lutron | 11
Control options Control options
Lutron
® |