Cut Sheet

Fluorescent and LED lighting is used
widely in educational, institutional
and commercial buildings. They
meet energy-conscious design
criteria such as ASHRAE/IESNA 90.1
standards and LEED
® guidelines.
Fluorescent and LED lighting is also
increasingly found in residential
spaces, especially in recessed
downlights and coves.
Dimming fluorescent lighting instead
of repeated switching helps maintain
lamp life and also saves energy.
All Lutron
® fluorescent dimming
ballasts and LED drivers are 100%
performance-tested at the factory
and come with a 5-year limited
warranty with Lutron field service
commissioning (3-year standard
warranty) from date of purchase.
Lutron Quality Systems are
registered to ISO 9001.2008.
The ballasts and drivers addressed
in this guide are specific to each
country’s voltage requirements.
Please confirm that the products you
have selected match the required
voltages by country shown on
pg. 92.
EcoSystem digital ballasts for
compact fluorescent lamps (CFL)
EcoSystem digital control
3-wire control
pg. 30
EcoSystem
® H-Series
digital ballasts
EcoSystem digital control
pg. 24
Hi-lume
® 3D digital ballasts
EcoSystem digital control
3-wire control
pg. 26
Tu-Wire
® ballasts
Tu-Wire control
pg. 34
Hi-lume ballasts
3-wire control
pg. 32
Hi-lume A-Series digital LEDdrivers
EcoSystem digital control
3-wire control
2-wire forward phase control
pg. 36
EcoSystem digital LED drivers
EcoSystem digital control
pg. 38
EcoSystem digital ballasts
EcoSystem digital control
3-wire control
pg. 28
For additional information on ballasts,
please visit www.lutron.com/ballast
For additional information on LEDs,
please visit www.lutron.com/LED
CE, CSA, CCC AND INMETRO
MODELS AVAILABLE
CE MODELS ONLY
Fluorescent ballasts LED drivers
Ballasts and drivers | Ballasts and drivers |
14 | Lutron Lutron | 15
Ballasts and drivers