Cut Sheet

09.07.17
369830g
RadioRA 2 Architectural RF GRAFIK T Local Controls
6www.lutron.com/support
Customer Assistance: 1.844.LUTRON1
(U.S.A. / Canada)
product specifications
Advanced Programming Mode
All Dimmers, Switches, and Accessories
GRAFIK T dimmers and switches contain an Advanced Programming Mode (APM) that allows users
to customize the control to meet their specific needs. For a detailed description of APM features and
uses please refer to Lutron Application Note #534.
Available advanced features include:
• High-end Trim: Adjust the maximum light level of the load.
• Low-end Trim: Adjust the minimum light level of the load.
• LED Brightness: Select between high and low brightness of the control LED.
• Sound On/Off: Enable or disable audible clicking feedback.
• Delayed Fade-to-Off: Adjust the waiting period upon fade-to-off.
• Toggle Fade Rate Adjust: Adjust the fade rate upon toggling.
• Protected Preset Adjust: Select between locked and unlocked presets.
Phase Selectable Dimmers Only
GRAFIK T Phase Selectable dimmers contain an extra menu to allow for the selection of FORWARD
and REVERSE dimming phase. The Phase Selectable dimmer default powers up in reverse dimming
phase.
Instructions for selecting phase:
1. Pull the FASS down to remove power from the dimmer.
2. Press and hold the top (high-end) of the light bar.
3. Push the FASS back up fully to reapply power.
4. Hold the top (high-end) of the light bar for 6 seconds
until the device beeps, then release.
5. Once in “Phase Selection Mode”, two lit LEDs show
current setting:
a. Top LED flashing indicates FORWARD-PHASE
had been selected.
b. Bottom LED flashing indicates REVERSE-PHASE
has been selected.
6. Press the top or bottom LED to change the
dimming phase.
7. Press and hold the toggle button for 6 seconds to exit
“Phase Selection Mode”.
FORWARD
Phase
REVERSE
Phase
Toggle
Button
NOTE: All advanced programming from a local device is disabled once it is addressed in a
RadioRA 2 or HomeWorks QS system. All advanced features are available from the GUI.