Cut Sheet

09.07.17
369830g
RadioRA 2 Architectural RF GRAFIK T Local Controls
9www.lutron.com/support
Customer Assistance: 1.844.LUTRON1
(U.S.A. / Canada)
product specifications
Control Phase Adaptive
Power Modules
(PHPM-PA-120-WH &
PHPM-PA-DV-WH)
1
3-wire Fluorescent
Power Modules
(PHPM-3F-120-WH &
PHPM-3F-DV-WH)
2
Switched Power
Module
(PHPM-SW-DV-WH)
3
0-10 V
Interface and
Switching Module
(GRX-TVI)
4
RRT-G25LW
  
RRT-G5NEW

5

5

5
RRT-G5ANSW

Compatible Power Boosters and Load Interfaces
Some local controls can be used to control power boosters or load interfaces. Up to three power
boosters or load interfaces can be used with one control. See table below for a list of controls and
compatible power boosters and load interfaces. When controlling power boosters/load interfaces,
the neutral must be connected.
Minimum Load
1
See Lutron P / N 369356 for wiring diagrams.
2
See Lutron P / N 369355 for wiring diagrams.
3
See Lutron P / N 369357 for wiring diagrams.
4
See Lutron P / N 369247 for wiring diagrams.
5
When using -G5NEW, dimming phase must be set to forward phase. See Advanced Programming Mode for details.
LED
1
Incandescent /
Halogen
MLV Halogen ELV
2,3
Application Number of
Companion
Devices
With
Neutral
Connected
With
Neutral
Disconnected
With
Neutral
Connected
With
Neutral
Disconnected
With
Neutral
Connected
With
Neutral
Disconnected
With
Neutral
Connected
Single Pole 0 1 LED lamp
4
2 LED lamps
4
5 W 40 W 40 W 40 W 40 W
Multi-location 1 1 LED lamp
4
3 LED lamps
4
5 W 80 W 40 W 80 W 40 W
Multi-location 2 1 LED lamp
4
4 LED lamps
4
5 W 120 W 40 W 120 W 40 W
Multi-location 3 1 LED lamp
4
5 LED lamps
4
5 W 160 W 40 W 160 W 40 W
Multi-location 4 1 LED lamp
4
6 LED lamps
4
5 W 200 W 40 W 200 W 40 W
Minimum load for the switch is 5 W, one Lutron compatible LED replacement lamp, or one Hi-lume
1% 2-wire LED driver.
Dimmer
Switch
1
Includes Lutron compatible LED replacement lamps and Hi-lume 1% 2-wire LED drivers.
2
Must meet transformer minimum load requirements.
3
ELV loads are only compatible with -G5NEW model
4
If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at www.lutron.com/led,
which is constantly being updated.